3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Is this car worth it?

Thread Tools
 
Search this Thread
 
Old Jun 21, 2005 | 10:43 AM
  #1  
pd_day's Avatar
Thread Starter
Spoolin'
Tenured Member: 25 Years
Liked
Loved
iTrader: (6)
 
Joined: Mar 2001
Posts: 2,802
Likes: 43
From: Miss.
Is this car worth it?

I just checked out a FD yesterday
1993 MB Touring with 68k miles on it. Original paint

Body is in decent shape. Some dings, dangs and 2 scratches; stone chips on the front bumper.
Interior is in fair shape for a 12 yr old car.
Comes with some aftermarket 3 spoke rims.

Original motor, turbos, transmission.
Boost pattern is ok. getting 10-8-10 then bleeding to 9psi around 6500 rpm.
Has downpipe but still on stock main cat.
Clutch, brakes have been replaced.

AST is cracked and needs replacing.
Cat-back is on it's last legs.
Rad is stock so most likely needs to be replaced.

Seller was asking 14.6k
I talked him down to 13.6k

Does that sound like a good price?
Reply
Old Jun 21, 2005 | 10:48 AM
  #2  
RX7Wishing's Avatar
BOOOYAHHHH!
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 1,578
Likes: 1
From: Virginia Beach
13.6. yes.
Reply
Old Jun 21, 2005 | 10:48 AM
  #3  
RX7Wishing's Avatar
BOOOYAHHHH!
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 1,578
Likes: 1
From: Virginia Beach
P.S get a compression test before you buy it.
Reply
Old Jun 21, 2005 | 10:52 AM
  #4  
tt2323's Avatar
Import Connoisseur
Tenured Member 15 Years
 
Joined: Oct 2003
Posts: 1,335
Likes: 1
From: All over the place
I would note the vacuum at idle, also has the car been driven with a cracked AST/overheated?
Reply
Old Jun 21, 2005 | 11:02 AM
  #5  
pd_day's Avatar
Thread Starter
Spoolin'
Tenured Member: 25 Years
Liked
Loved
iTrader: (6)
 
Joined: Mar 2001
Posts: 2,802
Likes: 43
From: Miss.
The car idles at a solid 800 RPM.
WIth A/C, it idles on around 900 - 1000 rpm.

Vaccume at idle is at around 15-17 inches.

Boost comes on at 2500 rpm.
10 psi by around ~3000rpm
8psi at 4500 and back to 10 psi up to around 6500 rpm.
then it bleeds to 9psi.

The owner, (2nd owner) only drove for 16000 miles in his 4 yrs of ownership. He is around 50 and is a VP of some investment company. 1st owner was a 50 yr old accountant that traded the car for a SLK.

I don't think the last owner drove the car hard at all.....
We checked for coolant on the ground / engine and there were none other then some creeping out of the AST tank seems (thats where the crack is)

No Hot start problem. Car started up fine after 10 minutes.

Slight surface rust on the rear wheel wells(on the bottom where the mud flaps should be). Probably from stone chips
Reply
Old Jun 21, 2005 | 11:05 AM
  #6  
charlies7's Avatar
3rd rotors a charm
Tenured Member: 20 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 3,331
Likes: 1
From: NW of windy city
i bought my 93 VR for 11,000 with 67k miles, dp, catback, and a fluidyne rad. But definately do a compression test
Reply
Old Jun 21, 2005 | 11:12 AM
  #7  
PhoenixDownVII's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 1,050
Likes: 0
From: New York
Originally Posted by pd_day

Boost pattern is ok. getting 10-8-10 then bleeding to 9psi around 6500 rpm.
You do know it's normal for the pressure to drop from 10psi as you approach redline right?
Reply
Old Jun 21, 2005 | 11:20 AM
  #8  
alberto_mg's Avatar
Rotary Freak
 
Joined: Aug 2002
Posts: 2,690
Likes: 0
From: nyc+li, ny
Originally Posted by PhoenixDownVII
You do know it's normal for the pressure to drop from 10psi as you approach redline right?

its not normal but it does happen on some cars. i would suspect the main cat might be slightly clogged and this is causing the boost to drop off slightly.

AST cracks make me nervous as the potential for overheating is there. I could be wrong, but I don't think that a compression check will show a bad coolant seal. My original motor went at 35k miles so take that for what it's worth. I've never seen rust on an RX7. Has it ever been hit or resprayed?

Overall, I would think you might be able to find a better car for close to that price or maybe a little more. It sounds like it needs some $$/tlc.
Reply
Old Jun 21, 2005 | 11:24 AM
  #9  
Jesuscookies's Avatar
I can haz rotary?
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2002
Posts: 3,793
Likes: 1
From: Southern California
In my opinion the car worth about 12-13k. However, if you keep searching, you may be able to get a bit more in the 13-14K range.
Reply
Old Jun 21, 2005 | 11:28 AM
  #10  
pd_day's Avatar
Thread Starter
Spoolin'
Tenured Member: 25 Years
Liked
Loved
iTrader: (6)
 
Joined: Mar 2001
Posts: 2,802
Likes: 43
From: Miss.
BTW, silicon hoses are done too.

Actually, the price is pretty good for a Canadian car. Can't really compare to the prices of a US car. It's hard enough finding a unmolested car ... haha

I can buy from the US, but then there are duties and bumper conversions that needs to be done before the car gets certified and that would offset the price advantage....

I've been actually looking for 2 yrs already. None really good ones come up...
Reply
Old Jun 21, 2005 | 11:32 AM
  #11  
pd_day's Avatar
Thread Starter
Spoolin'
Tenured Member: 25 Years
Liked
Loved
iTrader: (6)
 
Joined: Mar 2001
Posts: 2,802
Likes: 43
From: Miss.
how much would I be looking at if I need to have the rad + ast + cat back replaced.

probably an AL AST, KOYO rad and RB catback + new main cat?
Reply
Old Jun 21, 2005 | 11:33 AM
  #12  
PhoenixDownVII's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 1,050
Likes: 0
From: New York
Originally Posted by pd_day
how much would I be looking at if I need to have the rad + ast + cat back replaced.

probably an AL AST, KOYO rad and RB catback + new main cat?
Radiator can be $300-400.
Ast $150
Catback $500

Depends if used and whatnot. And that's american dinero.
Reply
Old Jun 21, 2005 | 11:33 AM
  #13  
AMRAAM4's Avatar
twinturboteddy ws my idol
Tenured Member 15 Years
 
Joined: Feb 2003
Posts: 2,347
Likes: 0
From: Elkton, MD
$12k at the most. We have to remember that unfortunately the value of these cars is starting to subside as opposed to the prices of 1.5 - 5 years ago. 2 years ago that car is a definite $14k...I don't believe so now.
Reply
Old Jun 21, 2005 | 11:34 AM
  #14  
PhoenixDownVII's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 1,050
Likes: 0
From: New York
Originally Posted by pd_day

I've been actually looking for 2 yrs already. None really good ones come up...
Wrong! Check your PM
Reply
Old Jun 21, 2005 | 11:38 AM
  #15  
pd_day's Avatar
Thread Starter
Spoolin'
Tenured Member: 25 Years
Liked
Loved
iTrader: (6)
 
Joined: Mar 2001
Posts: 2,802
Likes: 43
From: Miss.
Originally Posted by PhoenixDownVII
Wrong! Check your PM
Yup, I got your PM buddy... thanks
However, to bring the car in to Canada, I would need to pay 15% tax, 15% duty and then it would cost around $700 in bumpers and bumper supports so that it would pass Canadian crash test standards. 5mph instead of 3mph.

If that wasn't the case, I would be driving an US car already.... haha
Reply
Old Jun 21, 2005 | 11:44 AM
  #16  
PhoenixDownVII's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 1,050
Likes: 0
From: New York
Originally Posted by pd_day
Yup, I got your PM buddy... thanks
However, to bring the car in to Canada, I would need to pay 15% tax, 15% duty and then it would cost around $700 in bumpers and bumper supports so that it would pass Canadian crash test standards. 5mph instead of 3mph.

If that wasn't the case, I would be driving an US car already.... haha
True true...
Reply
Old Jun 21, 2005 | 11:58 AM
  #17  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
Is the price 13.6k Canadian dollars? If so, that is a very good deal. If you have been looking for 2 years, you should have a pretty good idea of what you will have to pay
Reply
Old Jun 21, 2005 | 12:33 PM
  #18  
AMRAAM4's Avatar
twinturboteddy ws my idol
Tenured Member 15 Years
 
Joined: Feb 2003
Posts: 2,347
Likes: 0
From: Elkton, MD
Originally Posted by adam c
Is the price 13.6k Canadian dollars? If so, that is a very good deal. If you have been looking for 2 years, you should have a pretty good idea of what you will have to pay
yeah, I agree if it is canadian. I saw "Miss." and thought Mississippi.
Reply
Old Jun 21, 2005 | 01:08 PM
  #19  
pd_day's Avatar
Thread Starter
Spoolin'
Tenured Member: 25 Years
Liked
Loved
iTrader: (6)
 
Joined: Mar 2001
Posts: 2,802
Likes: 43
From: Miss.
Nope, I've converted everything to USD and Miles .....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
May 30, 2019 08:47 PM
rotor_veux
Build Threads
46
Jun 12, 2018 10:39 AM
cam_7779
2nd Generation Specific (1986-1992)
9
Aug 18, 2015 07:48 AM
rx7brandon
General Rotary Tech Support
3
Aug 16, 2015 10:55 AM




All times are GMT -5. The time now is 11:11 AM.