3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Can someone tell me where the other end of this hose goes?

Thread Tools
 
Search this Thread
 
Old Sep 19, 2007 | 07:17 PM
  #1  
pakitagn's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Aug 2007
Posts: 107
Likes: 1
From: Wilmington, NC
Can someone tell me where the other end of this hose goes?

I removed the stock air intake from my car today to install a pfs intake and i realized that it won't fit in my car. While removing the intake, I noticed the hose on the right side of the air box wasn't connected to anything. Can someone tell me where it goes? i tried checking the manual online and it shows the hose, but it doesnt show where the hose connects to.

Reply
Old Sep 19, 2007 | 07:19 PM
  #2  
pakitagn's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Aug 2007
Posts: 107
Likes: 1
From: Wilmington, NC
also, for anyone out there who has installed a pfs intake, do i have to remove the air pump to install it?
Reply
Old Sep 19, 2007 | 07:25 PM
  #3  
MR_Rick's Avatar
Planning my come back
Tenured Member 20 Years
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Austin, Tx
I think that is the one that has no where to go actually. No need to remove the airpump for the intake. are you getting the intercooler duct and SMIC with it?
Reply
Old Sep 19, 2007 | 07:52 PM
  #4  
pakitagn's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Aug 2007
Posts: 107
Likes: 1
From: Wilmington, NC
yeah i'm waitin to buy the intercooler... i wonder why the box wouldnt fit...
Reply
Old Sep 19, 2007 | 08:04 PM
  #5  
MR_Rick's Avatar
Planning my come back
Tenured Member 20 Years
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Austin, Tx
did you make sure you put the hole of the box facing the intercooler? I had it before but I had the whole package intake/ic/duct and it fit fine with the air pump.
Reply
Old Sep 19, 2007 | 08:15 PM
  #6  
Sgtblue's Avatar
Urban Combat Vet
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Oct 2003
Posts: 12,160
Likes: 983
From: Mid-west
The airpump shouldn't be an issue, but I don't think the stock airbox will fit with the PFS IC.
Reply
Old Sep 19, 2007 | 08:17 PM
  #7  
yuichiror's Avatar
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 2,506
Likes: 0
From: Hampton, Va
Be sure to remove the lower brackets used for the stock airbox. Then the PFS airbox and SMIC should fit sorta fine.
Though the lower left hand corner of the PFS airbox may rub against your hood.



That extra hose is the "hose to nowhere". Don't worry about it.
Reply
Old Sep 19, 2007 | 08:27 PM
  #8  
pakitagn's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Aug 2007
Posts: 107
Likes: 1
From: Wilmington, NC
for some reason i couldnt get the two big hoses to fit. I found a 90 elbow to get one of the intake hoses to fit, but it didn't fit quite right. I guess i'll give it another try this weekend. also, where can i get this piece of piping? i checked everywhere but i can't find one.


Last edited by pakitagn; Sep 19, 2007 at 08:33 PM.
Reply
Old Sep 19, 2007 | 08:37 PM
  #9  
pakitagn's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Aug 2007
Posts: 107
Likes: 1
From: Wilmington, NC
Originally Posted by Sgtblue
The airpump shouldn't be an issue, but I don't think the stock airbox will fit with the PFS IC.
i'm trying to get the pfs intake to work with the stock intercooler until i can get my hands on the pfs one
Reply
Old Sep 19, 2007 | 08:40 PM
  #10  
yuichiror's Avatar
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 2,506
Likes: 0
From: Hampton, Va
The PFS intake uses the stock intake piping. If you check their website, there's a pdf install guide you can download.
Reply
Old Jan 11, 2008 | 03:03 AM
  #11  
RotorDream's Avatar
Rotary Ninja
 
Joined: Oct 2007
Posts: 683
Likes: 0
From: Wichita Falls, TX
Originally Posted by pakitagn
I removed the stock air intake from my car today to install a pfs intake and i realized that it won't fit in my car. While removing the intake, I noticed the hose on the right side of the air box wasn't connected to anything. Can someone tell me where it goes? i tried checking the manual online and it shows the hose, but it doesnt show where the hose connects to.

yes that is the "hose to nowhere" on JDM cars there is a charcole filter or something like that on the end of it. if you look inside the OEM intake you will see its not connected to the intake stream and doesnt pass through the filter or anything its main perpose is sound dampening.
Reply
Old Jan 11, 2008 | 11:13 AM
  #12  
mrb63083's Avatar
Lives on the Forum
Tenured Member 20 Years
iTrader: (4)
 
Joined: Feb 2002
Posts: 5,748
Likes: 1
From: Dallas
hah, I remember when I got my aftermarket intake and was wondering the same thing. Yeah, it just drops down to nothing.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
NotMrButts
1st Generation Specific (1979-1985)
23
Sep 15, 2015 09:46 PM
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
Frox
General Rotary Tech Support
2
Sep 8, 2015 08:36 AM




All times are GMT -5. The time now is 08:20 PM.