Body Stiffeners
#1
Senior Member
Thread Starter
Join Date: Sep 2002
Location: Calgary AB
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
Body Stiffeners
No... I am NOT talking about Viagra or any of those inflatable toys you can buy in red light districts.
What I am talking about are the kind of struts used to stiffen the RX-7 frame/body. I have attached a picture of the Mazdaspeed offering below. Anyone have this installed on their cars, and if so, do they provide a noticable improvement?
What I am talking about are the kind of struts used to stiffen the RX-7 frame/body. I have attached a picture of the Mazdaspeed offering below. Anyone have this installed on their cars, and if so, do they provide a noticable improvement?
#2
Senior Member
Thread Starter
Join Date: Sep 2002
Location: Calgary AB
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
#4
Senior Member
Join Date: Aug 2001
Location: Tokyo Japan
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
#5
Weird Cat Man
A stock FD already HAS cross bars at a couple locations...
If I felt the need for more, I'd just buy some bars at the hardware store and drill holes in them and bolt them on.. I don't know what you're getting for 700+ dollars!
Brian
If I felt the need for more, I'd just buy some bars at the hardware store and drill holes in them and bolt them on.. I don't know what you're getting for 700+ dollars!
Brian
#7
Senior Member
Thread Starter
Join Date: Sep 2002
Location: Calgary AB
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
Wargasm: I don't know what you get for $700 dollars either but I have been reading all the new articles about the RX8 and they keep touting the increased body stiffness over the RX7. So I am guessing its got to be good. I just want to know from anyone with experience what kind of improvement you could expect.
Trending Topics
#8
Senior Member
Join Date: Aug 2001
Location: Tokyo Japan
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Hi
As for body stiffner,
most effective and cost friendly is fender stiffner.
Around $150, more effective than strut bar.
But no visual appeal.
If you pay about $600 for body stiffner,
you shoud buy bushings.
Very effective and very cheap.
Front Lower arm bushings are strongly recomended.
Thanks
As for body stiffner,
most effective and cost friendly is fender stiffner.
Around $150, more effective than strut bar.
But no visual appeal.
If you pay about $600 for body stiffner,
you shoud buy bushings.
Very effective and very cheap.
Front Lower arm bushings are strongly recomended.
Thanks
#11
Perpetual Project
iTrader: (4)
Originally posted by Nameless
A fender stiffener? Whats that?
A fender stiffener? Whats that?
#16
Rebreaking things
Join Date: Jun 2001
Location: 1 foot in Boston 1 in NJ
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
inukai did a moderator tell you that you could no longer post pictures? The forum isn't letting anyone post pics right now. If you have in fact been banned I'd be happy to post the pictures for you (assuming that is ok with the moderators). Send them to CCarlisi@aol.com
-Chris C.
-Chris C.
#18
I Post Mad Quick Yo!
Join Date: Dec 2001
Location: Markham, Ont. Can.
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
Cp racing makes them!..
There really cheep also and good quality. Around $150 I think.
Here is the e-mail
Rx7stuff@hotmail.com
or Pm Guru on the forum..
There really cheep also and good quality. Around $150 I think.
Here is the e-mail
Rx7stuff@hotmail.com
or Pm Guru on the forum..
Last edited by Mld>7; 03-09-03 at 12:54 PM.
#19
Senior Member
Join Date: Nov 2002
Location: out there
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
I saw a lot of companies in Japan selling them for a few years now. hummmmmm
I didnt check the prices. I can ask someone I know that has them on his car and see how much.
I didnt check the prices. I can ask someone I know that has them on his car and see how much.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM