Anyone use the Power Enterprise Boost Controller
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Jacksonville Florida
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Anyone use the Power Enterprise Boost Controller
Curious if anyone has experience, either positive or negative, with the Power Enterprise Boost Controller. Seems to have some pretty nice features and it combines the boost gauge with the controller.
#3
RX-7 Bad Ass
iTrader: (55)
Seems nice, but it's pretty pricey - well over $400. Might also want to look at the AEM Tru-Boost - it's a similar deal (boost gauge and boost controller in one) and is well under $300.
Dale
Dale
#4
Will u do me a kindness?
iTrader: (2)
It looks pretty nice, but is very expensive. This is the first I've heard of this product.
Other boost gauge/controller alternatives
Turbosmart E-Boost 2
AEM Tru-Boost
SARD Trigger
I'm sure there are a few more out there that I'm not aware of or can't remember off the top of my head.
Other boost gauge/controller alternatives
Turbosmart E-Boost 2
AEM Tru-Boost
SARD Trigger
I'm sure there are a few more out there that I'm not aware of or can't remember off the top of my head.
#5
ive heard power enterprises makes very solid products. but Id go with sard personally because it has scramble boost which is always a convenient feature if you daily drive and track it.
#6
Senior Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Jacksonville Florida
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
SARD is over $500 while the Power Enterprise can be had for ~$360. Only found one place that sold the SARD. Anyone know where it might be had less expensively?
#7
Rotary Freak
iTrader: (9)
To answer your PM, i bought my SARD brand new off of E Bay. It was just by fluke it was on there when i was looking as they are a very rare piece. So obviously i grabed it for cheaper then retail.
When i was looking, the cheapest "site" was rotary extreme over all others on the net I could find at the time..
heres a pic of it set up.......
When i was looking, the cheapest "site" was rotary extreme over all others on the net I could find at the time..
heres a pic of it set up.......
Trending Topics
#10
Avoid Fuego Racing
I would not have an LCD boost controller personally. There is no way for it to react fast enough to be useful. Sure they usually offer logging, so you can look back and see what PSI your engine blew at, but other than that, they are useless IMO. I would pay the extra for the Power Enterprise one.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
MoTeC
5
09-10-15 07:58 PM