Anyone know this part
10-28-23, 09:30 AM
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,835
Received 2,604 Likes
on
1,847 Posts
why that is FD01-66-310C! we're acquainted, but i wouldn't say i know it.
The following 2 users liked this post by j9fd3s:
gracer7-rx7 (10-30-23),
Testrun (11-01-23)
10-28-23, 06:25 PM
#5
Edit on my earlier post…if the car wasn’t previously equipped you’d also need the master switch (button) on the dash.
If it’s just a matter of reinstalling the actuator it’s pretty intuitive. You’ll need 3 of the standard 10mm bolts to mount it just behind the left shock tower, reconnect the cable to the throttle-body and plug it in.
Otherwise——>
https://www.rx7club.com/3rd-generati...ntrol-1031871/
https://www.rx7club.com/3rd-generati...quest-1087878/
If it’s just a matter of reinstalling the actuator it’s pretty intuitive. You’ll need 3 of the standard 10mm bolts to mount it just behind the left shock tower, reconnect the cable to the throttle-body and plug it in.
Otherwise——>
https://www.rx7club.com/3rd-generati...ntrol-1031871/
https://www.rx7club.com/3rd-generati...quest-1087878/
Last edited by Sgtblue; 10-28-23 at 06:36 PM.
The following users liked this post:
gracer7-rx7 (10-30-23)
Trending Topics
The following users liked this post:
gracer7-rx7 (10-30-23)
The following users liked this post:
Howard Coleman (10-30-23)
Thread
Thread Starter
Forum
Replies
Last Post
OneRotor
1st Gen General Discussion
19
11-27-08 02:06 PM
KeloidJonesJr.
3rd Generation Specific (1993-2002)
25
03-11-06 04:28 PM