anyone else interested in buying a kirk racing roll bar?
02-06-04, 10:44 AM
#26
My Custom Title > Your's
Thread Starter
I'll have to call to inquire as to the discount I would receive if the buyin is met but here is the list info.
>> We have several products for the 3rd Gen RX7. The 4 point bar includes
>> the main loop with a diagonal and horizontal brace and two rear legs.
>> This bar can be made to mount behind the seat or in the storage bin
>> location for those who need to maximize seat travel. This bar can be
>> made of a 1.75" x .120 DOM material for $315 or a 2" x .180 for $350.
>> This bar is SCCA legal through SOLO I. If you are doing other racing
>> with the car, please let us know. Shipping to a commercial address or
>> freight terminal in theSpartanburg area should run about $65. If you
>> have any questions or need more information, please let me know. I would
>> be happy to help. Pictures are available if you would like.
>> Julie Stewart
>> We have several products for the 3rd Gen RX7. The 4 point bar includes
>> the main loop with a diagonal and horizontal brace and two rear legs.
>> This bar can be made to mount behind the seat or in the storage bin
>> location for those who need to maximize seat travel. This bar can be
>> made of a 1.75" x .120 DOM material for $315 or a 2" x .180 for $350.
>> This bar is SCCA legal through SOLO I. If you are doing other racing
>> with the car, please let us know. Shipping to a commercial address or
>> freight terminal in theSpartanburg area should run about $65. If you
>> have any questions or need more information, please let me know. I would
>> be happy to help. Pictures are available if you would like.
>> Julie Stewart
02-06-04, 11:13 PM
#29
DRFTRX7
VERY INTERESTED
I'm also very interested. Please let me know what kind of prices we are talking about. Also, what kind of bars are we talking about and if someone could please let me know the differences between them. (i.e. passenger room, storage bin access, etc.)
Thanks a lot,
Craig
Thanks a lot,
Craig
02-07-04, 10:39 AM
#30
3rd motors a charm I hope
Join Date: Apr 2003
Location: Central New York
Posts: 2,054
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by COsborne
I'll have to call to inquire as to the discount I would receive if the buyin is met but here is the list info.
>> We have several products for the 3rd Gen RX7. The 4 point bar includes
>> the main loop with a diagonal and horizontal brace and two rear legs.
>> This bar can be made to mount behind the seat or in the storage bin
>> location for those who need to maximize seat travel. This bar can be
>> made of a 1.75" x .120 DOM material for $315 or a 2" x .180 for $350.
>> This bar is SCCA legal through SOLO I. If you are doing other racing
>> with the car, please let us know. Shipping to a commercial address or
>> freight terminal in theSpartanburg area should run about $65. If you
>> have any questions or need more information, please let me know. I would
>> be happy to help. Pictures are available if you would like.
>> Julie Stewart
I'll have to call to inquire as to the discount I would receive if the buyin is met but here is the list info.
>> We have several products for the 3rd Gen RX7. The 4 point bar includes
>> the main loop with a diagonal and horizontal brace and two rear legs.
>> This bar can be made to mount behind the seat or in the storage bin
>> location for those who need to maximize seat travel. This bar can be
>> made of a 1.75" x .120 DOM material for $315 or a 2" x .180 for $350.
>> This bar is SCCA legal through SOLO I. If you are doing other racing
>> with the car, please let us know. Shipping to a commercial address or
>> freight terminal in theSpartanburg area should run about $65. If you
>> have any questions or need more information, please let me know. I would
>> be happy to help. Pictures are available if you would like.
>> Julie Stewart
Adam
02-07-04, 09:39 PM
#34
Senior Member
Join Date: Apr 2002
Location: Dallas
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by blackkiller7
any pics of the different bars installed in an FD? Im down the road and would love to come get one! Do you have to have the 2' bar to meet the 11sec strip rule?
any pics of the different bars installed in an FD? Im down the road and would love to come get one! Do you have to have the 2' bar to meet the 11sec strip rule?
02-12-04, 02:13 PM
#35
My Custom Title > Your's
Thread Starter
Okay I just spent a while on the phone with kirk asking them all of your questions. There are a LOT of options here but first I'll overview the main stuff. Shipping is around $65 (business) if you can get 2 bars shipped to you the price will be the same because the bars weigh around 60lb but the freight limit is 120lb.
There are 2 trims. First one is the 4 pt roll bar that goes behind the seat and you'll lose roughly 1-2 clicks of seat travel which isnt really very much. I cant reach the pedals that far back anyway. The other option is to put the bar in the bins. Putting the bar in place of the bins is not SCCA legal as far as I know. Both trims are the same price.
You can get 1 3/4" tubing or 2" tubing but the 2" is more expensive, heavier and not necessary for any sort of racing. It is also about the same strength as the 1 3/4.
If you want to run 11s you pretty much need to have a full 6 pt cage. There isnt really a sanctioned setup by both the NHRA and SCCA but you can usually get by with 6-8 bars in the scca. Anything over that isnt legal. You'll have to see what you need for your type of racing but unless you're racing at a national level most places will accept the 4 pt 1 3/4" bar for <11.0
You can also get the bars painted or not painted (if you intend to have it powder coated)
List on the 1 3/4" bar in any trim is $315
Our discount would put the price at $265
List on the 2" bar in any trim is $335
Our discount would put the price at $281
Thats cheaper than I've found any bar so far.
I can't wait!
There are 2 trims. First one is the 4 pt roll bar that goes behind the seat and you'll lose roughly 1-2 clicks of seat travel which isnt really very much. I cant reach the pedals that far back anyway. The other option is to put the bar in the bins. Putting the bar in place of the bins is not SCCA legal as far as I know. Both trims are the same price.
You can get 1 3/4" tubing or 2" tubing but the 2" is more expensive, heavier and not necessary for any sort of racing. It is also about the same strength as the 1 3/4.
If you want to run 11s you pretty much need to have a full 6 pt cage. There isnt really a sanctioned setup by both the NHRA and SCCA but you can usually get by with 6-8 bars in the scca. Anything over that isnt legal. You'll have to see what you need for your type of racing but unless you're racing at a national level most places will accept the 4 pt 1 3/4" bar for <11.0
You can also get the bars painted or not painted (if you intend to have it powder coated)
List on the 1 3/4" bar in any trim is $315
Our discount would put the price at $265
List on the 2" bar in any trim is $335
Our discount would put the price at $281
Thats cheaper than I've found any bar so far.
I can't wait!
02-12-04, 02:29 PM
#37
Hamado things my way!
Join Date: Oct 2001
Location: Pensacola, Florida
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Could you find out if the bar that goes in place of the bins consumes any seat space? Maybe a picture of that bar inside the car?
I'm assuming the legality dispute with the SCCA would be for the stock classes, as taking out the storage bins could be contested as weight reduction. I'll be running in modified so it really doesn't matter.
I'm assuming the legality dispute with the SCCA would be for the stock classes, as taking out the storage bins could be contested as weight reduction. I'll be running in modified so it really doesn't matter.
02-12-04, 04:24 PM
#40
Senior Member
Join Date: Apr 2002
Location: Dallas
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by fastcarfreak
If you dont mount them in the bins, can you still have use of your bins?
If you dont mount them in the bins, can you still have use of your bins?
02-13-04, 09:00 PM
#45
Senior Member
Join Date: Apr 2002
Location: Dallas
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Well, I think that is their standard pricing. Not sure what savings COsborne is able to get off of that. Those prices do not include shipping, but they can handle that for you.
So, yes, you can order direct for that price I believe.
So, yes, you can order direct for that price I believe.
02-14-04, 02:53 AM
#48
My Custom Title > Your's
Thread Starter
Originally posted by xchaos
Well, I think that is their standard pricing. Not sure what savings COsborne is able to get off of that. Those prices do not include shipping, but they can handle that for you.
So, yes, you can order direct for that price I believe.
Well, I think that is their standard pricing. Not sure what savings COsborne is able to get off of that. Those prices do not include shipping, but they can handle that for you.
So, yes, you can order direct for that price I believe.
List on the 1 3/4" bar in any trim is $315
Our discount would put the price at $265
List on the 2" bar in any trim is $335
Our discount would put the price at $281
If you want to go ahead and place an order with me you can we'll have 2 bars and will only need 2 more. Shouldnt be too hard to get 4 people for that price.
