Scrodes

Is there a section in the Factory shop manual for the A/C or even for that matter - removing the power steering pump?


I've removed them because i need to change the bracket with the tensioner pulley. I just want to make sure I don't miss hooking anything back up. Don't worry - the only things I disconnected for the Aircon were some wiring clips. My air con worked until last year, I'm going to have my mechanic make a go at getting it working again before I remove it completely.

DaleClark

iTrader: (55)

Not really much to hook up - 1 wire to each, PS pump has a low and a high pressure line and the AC has 2 lines going to it.

The section on engine install in the shop manual should have a general overview of re-attaching the bracket.

If you run into specific problems, take a picture and post up.

Dale

TomU

iTrader: (11)

There are several FSMs. The '93 Service Highlights manual is more of why things work. The '94 Workshop Manual is more of a how-to (think there's also a corresponding '93 workshop man). There's also a '94 Body Electric Manual.

HVAC is detailed in the '93 Service Highlights (Sect U) and '94 Body Elec (Sec G)

P Steering is in both '93 Svc Highlights and '94 Workshop Man (Sec N)