99 Fans p/n?
#53
Banned. I got OWNED!!!
Join Date: Dec 2003
Location: Corpus Christi, TX
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
quicksilver_rx7 -----The reason JT-Imports never sold them is because the ones from the 99-02 RX7s, were about $300 a pop, so we had only made available the fan blades themselves. The RX8 motors are 2 different types and 2 different PNs.
#54
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
Sorry to bring this thread back up... I need to know which fans pull more air, 7 or 5 blade??
I was told by someone that between 93 4 vs 5 blade, 4 pulls more air. I'm now thinking about buying couple of these 7 blades if they pull more.. Any input from some vets would be appreciated!
I was told by someone that between 93 4 vs 5 blade, 4 pulls more air. I'm now thinking about buying couple of these 7 blades if they pull more.. Any input from some vets would be appreciated!
#55
I have installed the whole 99 assembly (fans + motors),and the biggest difference i noted,is the lower noise level.The fans seem to pull more air,but not too much,maybe a 10% compared to the 93's...
#57
DGRR 2017 4/26-4/30, 2017
iTrader: (13)
Well, Far as my understanding is that Mazda put 4 and 5 blade configuration because of the location of SMIC. I believe 4 blade is located under the SMIC and pulls more air than the 5 blade. I'm guess its the same thing with 99+ 5 and 7 blade configuration.
Also, reading this thread and response I got in the past, the 99 motors draw less current. I guess my thing is, I'm not going to have a SMIC (I have FMIC) and the radiator will be verticle. I would like to put higher CFM fans if I can as I'm having hard time channelling air.. But if 4 blades pull more air (current set up), then I'm not going to worry about getting the 99+ blades.
Also, reading this thread and response I got in the past, the 99 motors draw less current. I guess my thing is, I'm not going to have a SMIC (I have FMIC) and the radiator will be verticle. I would like to put higher CFM fans if I can as I'm having hard time channelling air.. But if 4 blades pull more air (current set up), then I'm not going to worry about getting the 99+ blades.
#59
Senior Member
Join Date: Jul 2002
Location: San Francisco Bay area
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
Im glad you did.. I found some new info for my FD.
Originally Posted by herblenny
Sorry to bring this thread back up... I need to know which fans pull more air, 7 or 5 blade??
I was told by someone that between 93 4 vs 5 blade, 4 pulls more air. I'm now thinking about buying couple of these 7 blades if they pull more.. Any input from some vets would be appreciated!
I was told by someone that between 93 4 vs 5 blade, 4 pulls more air. I'm now thinking about buying couple of these 7 blades if they pull more.. Any input from some vets would be appreciated!
#63
motor : N3G1-15-150
7 blade fan : RF1S-15-140
5 blade fan : RF2A-15-140
front fan bolt : B595-15-T59
Be aware that the cable connectors are different from the 93-95,you 'll have to use the old one.
7 blade fan : RF1S-15-140
5 blade fan : RF2A-15-140
front fan bolt : B595-15-T59
Be aware that the cable connectors are different from the 93-95,you 'll have to use the old one.
#65
Rotary Freak
Motors were about 22,000 yen each prior to a couple of recent sizeable Mazda price increases, probably best searching Yahoo for 2nd hand, complete assemblies.
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM