13B-REW and 13B-RE Similarities
#1
Senior Member
Thread Starter
Join Date: May 2007
Location: Loveland CO
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
13B-REW and 13B-RE Similarities
I'm curious as to what the similarities are between the RE and REW 13Bs?
Would/Will REW parts work on RE? Like I'm curious mostly about the piece that connects the throttle Body and the iC piping together, injectors, and Fuel rail.
Anything else interchangable?
I know the rotors and such are all the same but I'm not finding any info other than they are both very simmilar.
Would/Will REW parts work on RE? Like I'm curious mostly about the piece that connects the throttle Body and the iC piping together, injectors, and Fuel rail.
Anything else interchangable?
I know the rotors and such are all the same but I'm not finding any info other than they are both very simmilar.
#3
Senior Member
Thread Starter
Join Date: May 2007
Location: Loveland CO
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Well I'm ordering parts for my RE build. So I'm hoping that they are VERY similar to 3rd gen REWs.
This picture is of the area of concern... does anyone know if it is the same as the REW?
This picture is of the area of concern... does anyone know if it is the same as the REW?
#4
registered user
iTrader: (1)
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
the TB's are different, but you can use an REW TB on an RE UIM or vice versa.
The REW TB is better.
The intake elbow is also different, they are specific to eiher the RE or REW TB respectively.
The REW TB is better.
The intake elbow is also different, they are specific to eiher the RE or REW TB respectively.
#6
I did a RE swap alot harder then it looks made 546 b@ 14lbs 726 @ 34lbs actually ACOSTA SR did it on the side as a favor for me we are friends. he does not like to do this swap.
#7
registered user
iTrader: (1)
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
Though I do think its slightly larger (going by memory and eyeballs not measurements), when I say its better I mean that it doesn't have the double throttle. In the REW the double throttle is in the UIM, in the RE the double throttle is in the TB.
Trending Topics
#8
Still got it.
iTrader: (2)
I have a set of RE intake manifolds.
I'm currently trying to source a 20B throttle Body ( want the A.I.C.) and also the 20B throttle body is larger...
here is a link that I'm currently working on reviving.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/13b-cosmo-224062/
I'm currently trying to source a 20B throttle Body ( want the A.I.C.) and also the 20B throttle body is larger...
here is a link that I'm currently working on reviving.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/13b-cosmo-224062/
#9
registered user
iTrader: (1)
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
Right this makes sense, where they are talking about an adapter, the adapter came attached to an FD throttle body I purchased, I didn't reliseze until now that it wasn't a stock part.
I have a set of RE intake manifolds.
I'm currently trying to source a 20B throttle Body ( want the A.I.C.) and also the 20B throttle body is larger...
here is a link that I'm currently working on reviving.
https://www.rx7club.com/showthread.php?t=224062
I'm currently trying to source a 20B throttle Body ( want the A.I.C.) and also the 20B throttle body is larger...
here is a link that I'm currently working on reviving.
https://www.rx7club.com/showthread.php?t=224062
#12
Senior Member
Thread Starter
Join Date: May 2007
Location: Loveland CO
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
I'll need to upgrade the injectors and such i know... so i was wondering about fuel system mostly and if the REW and RE are the same where your piping from the intercooler connect to the throttle mount up. I'd like to get the Greddy compression elbow and put it on a RE witht he RE manifold. Could you messure the bolt holes possible one both the RE and REW? See the picture above to see what exactly I'm looking at.
Also parts wise would Tubeo 2 engine parts work on a RE or would some REW parts work on and RE?
(This is my 100th post!!!)
#15
Learns the hard way.....
iTrader: (2)
Thanks. Seems kind of silly that the RE thottle body is smaller than the REW when the intake runners are 30% larger. I'm just trying to decide if having the throttle body modified to accept +4mm throttle blades is a worthwhile mod. Form what you just told me, it is.