3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

$3000 Mods

Thread Tools
 
Search this Thread
 
Old 04-14-02, 10:06 AM
  #1  
Junior Member

Thread Starter
 
Join Date: Apr 2002
Location: St. Louis MO
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
$3000 Mods

OK, I have $3000 to spend on my FD what should I do. I have only one mod and thats a down pipe. So other than that.
Old 04-14-02, 10:15 AM
  #2  
Senior Member

 
EricM's Avatar
 
Join Date: Jul 2001
Posts: 411
Likes: 0
Received 0 Likes on 0 Posts
Boost controller, catback, ECU, and a nice set of lightweight rims. That should do.
Old 04-14-02, 10:16 AM
  #3  
Rotary Enthusiast

iTrader: (3)
 
to_slow's Avatar
 
Join Date: Nov 2001
Location: michigan
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by EricM
Boost controller, catback, ECU, and a nice set of lightweight rims. That should do.
Dam 3000$ goes that far 4 you ?
Old 04-14-02, 10:44 AM
  #4  
Full Member

 
purepsi's Avatar
 
Join Date: Mar 2002
Location: Tx
Posts: 105
Likes: 0
Received 0 Likes on 0 Posts
boost guage, egt guage,mb,cb,intake,some type of ecu, radiator, ast elimantor, y-pipe. you can mix and match and maybe throw in an intercooler.
Old 04-14-02, 12:26 PM
  #5  
Full Member

 
RX7FAN's Avatar
 
Join Date: Mar 2001
Location: Turtle Creek, Pa, USA (Sub of Pittsburgh)
Posts: 170
Likes: 0
Received 0 Likes on 0 Posts
1 Power FC & commander

2 N1 style catback or Racing beat dual if you like the stock look

3 Intake, Apexi is nice for open style as long as you dont plan on a large SMIC later. M2 style for cold air style if you want to eat up a chunk of that 3K

4 A real good set of tires. Assuming you don't have a good set. A lot of people over look good tires as a helpfull mod.

5 If you shopped wisely you will have change left over for Vac lines. ( you do the labor ), AST custom(cheaper) or namebrand, New spark plugs, change your oil, filter and coolant.

6. Buy some 3M car care products and use them.



Jim in PA
Old 04-14-02, 12:38 PM
  #7  
Rotary Enthusiast

 
spoolin's Avatar
 
Join Date: Aug 2001
Location: Memphis, TN - wishin' i was back in Ft Worth
Posts: 1,024
Likes: 0
Received 1 Like on 1 Post
damn purepsi, where do you shop? i wanna go there
Old 04-14-02, 12:47 PM
  #8  
Mr. Links

iTrader: (1)
 
Mahjik's Avatar
 
Join Date: Aug 2001
Location: Kansas City, MO
Posts: 27,595
Received 40 Likes on 26 Posts
All great suggestions.

Just keep in mind, unless you plan on doing all the installations yourself, about 1/3 of that money will be needed for labor costs.

Just something to think about.
Old 04-14-02, 01:01 PM
  #9  
Senior Member

 
Pressurized's Avatar
 
Join Date: Jul 2001
Location: Columbus, Ohio
Posts: 596
Likes: 0
Received 0 Likes on 0 Posts
Re: $3000 Mods

Originally posted by mikestl15
OK, I have $3000 to spend on my FD what should I do. I have only one mod and thats a down pipe. So other than that.
Well, how many miles do you have on the car? If they are kinda high you might wanna get some parts that will help maintain a healthy engine. The dowpipe you have already is a good place to start.

silicon vacuum hoses -$200
y-pipe -$250
aluminum rad. -$450
fuel filter -$40
plugs and wires -$80

that should get the ball rolling on some of the 'older' parts that are likely to fail.
The just decide what you want, you may want more speed, you might want some better looks. But just remember not to get too many 'go fast' parts without getting an ECU!

And if you're interested, I'm selling my M2 ECU very soon for just $400! Drop me a line!
Old 04-14-02, 01:09 PM
  #10  
Do it right, do it once

iTrader: (30)
 
turbojeff's Avatar
 
Join Date: Apr 2001
Location: Eugene, OR, usa
Posts: 4,830
Likes: 0
Received 12 Likes on 8 Posts
Fuel filter, thermostat, plugs, wires, fluid change on diff, trans and brakes.

The above depends on how long since they were last changed of course.

I'd go for a boost guage, temp guage, cat-back, good brake pads (like Hawk HPS), still have more $$? Go for a ECU and a intake (get closed box type), and then an IC.

Becareful modding your car, you could just get a complete M2 stage 3 package for $3500 - downpipe cost. The problem with doing just those mods is that the rest of your car needs to be taken care of before you go for the big power. Also big power without control (good tires and brakes) will lead to a wrecked FD.

I personally know a guy that put coilovers on his car but had cords showing on the tires and holes in his muffler. Stupid, stupid...

Mod wisely.

Jeff
Old 04-14-02, 01:22 PM
  #11  
Full Member

 
purepsi's Avatar
 
Join Date: Mar 2002
Location: Tx
Posts: 105
Likes: 0
Received 0 Likes on 0 Posts
spoolin,
a friend of mine use to own a rotary performance shop so i got everything pretty cheap. i guess my post doesnt count
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
demetlaw
3rd Generation Specific (1993-2002)
6
10-02-15 06:22 PM
musker
New Member RX-7 Technical
1
10-01-15 05:58 PM



Quick Reply: $3000 Mods



All times are GMT -5. The time now is 11:32 AM.