2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

would a bad waste gate cause this?

Thread Tools
 
Search this Thread
 
Old Aug 4, 2005 | 03:16 PM
  #1  
rrx777's Avatar
Thread Starter
andrew
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 128
Likes: 0
From: st.francisville,la
would a bad waste gate cause this?

ok, the car would not accelerate under boost? it is on the stock tmic and turbo. It normaly boost around 11 psi but when I was doing some test. I notticed it would boost under very little throttle, and then shot all the way up to 15psi! but the car still would barely move. the turbo is makeing a horrible sound almost like siren? I thought the motor was blown but I had a comp test done at mazda and every thing was fine any ideas, could the waste gate cause the high boost but no go?
Reply
Old Aug 4, 2005 | 03:19 PM
  #2  
Madrx7racer's Avatar
Banned. I got OWNED!!!
 
Joined: Nov 2002
Posts: 312
Likes: 0
From: San Jose, CA
a blown turbo??? I would not boost over 12 psi on a stock fuel system....you're asking for the motor to blow. Glad it didn't when you hit 15 psi...get another Stock or aftermarket (BNR TURBO is my favorite) and make sure the wastegate is ported.
Reply
Old Aug 4, 2005 | 03:19 PM
  #3  
TwistedRotors's Avatar
Compression Tester Guy
Tenured Member 15 Years
iTrader: (3)
 
Joined: Apr 2003
Posts: 1,010
Likes: 0
From: Houston, TX
I do believe your turbo is shot. That sound is likely the compressor or turbine coming into contact with the housing.
-John
Reply
Old Aug 4, 2005 | 03:27 PM
  #4  
rrx777's Avatar
Thread Starter
andrew
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 128
Likes: 0
From: st.francisville,la
well i checkd the turbo. spun the wheel with my finger and there was no sound at all and it dident drag? any thing else to look at?
Reply
Old Aug 4, 2005 | 06:19 PM
  #5  
PastelliFC's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2004
Posts: 98
Likes: 0
From: New Mexico
Its a turbo, same exact thing happened to my old tii
Reply
Old Aug 4, 2005 | 06:20 PM
  #6  
gergrx7's Avatar
Boosting Again
Tenured Member 05 Years
 
Joined: May 2003
Posts: 1,350
Likes: 1
From: Gainesville, FL
check for vaccum/boost leaks.
Reply
Old Aug 4, 2005 | 07:51 PM
  #7  
RotaryEvolution's Avatar
Sharp Claws
Tenured Member 15 Years
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 50
From: Central Florida
try pushing in on and then pulling out on the turbo shaft.
Reply
Old Aug 4, 2005 | 07:54 PM
  #8  
KompressorLOgic's Avatar
I
Tenured Member: 20 Years
iTrader: (6)
 
Joined: May 2004
Posts: 3,755
Likes: 12
From: Spanaway, WA
yeah when my turbo was going it was making siren noises when it spools and despools.sign its shot.

what mods do u have??? ill assume you have an aftermarket boost gauge right??
what else do u have?
Reply
Old Aug 4, 2005 | 07:55 PM
  #9  
ilike2eatricers's Avatar
I R SAD PANDA W/O BAW
 
Joined: Nov 2002
Posts: 6,061
Likes: 1
From: bay area
Do you actually build boost? Are you verifying this with an aftermarket boost gauge?
Reply
Old Aug 4, 2005 | 09:30 PM
  #10  
mr_vaughn's Avatar
Chillin
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Feb 2002
Posts: 684
Likes: 5
From: LA,CA
check all your piping from turbo to IC and IC to TB.
May have a cracked hose. which only opens up wn under boost.
Reply
Old Aug 5, 2005 | 06:51 AM
  #11  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
1) Check to see if your leadings are firing.

2) Make sure your trailings are NOT backwards!


-Ted
Reply
Old Aug 5, 2005 | 12:02 PM
  #12  
rrx777's Avatar
Thread Starter
andrew
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 128
Likes: 0
From: st.francisville,la
well i checked for leaks found none, and the after maket gague is showing boost but since it started makeing the sound and running like crap I havent let it go over 2 or 3 psi.Im gonna check the ignition next the car has na trailing and leading packs so maybe thats it. reason I thought it was the waste gate is that the car has never boosted past 11psi then when the problem started it shot to 15psi under very lite throttle.
Reply
Old Aug 5, 2005 | 12:07 PM
  #13  
SonicRaT's Avatar
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Coil packs are the same. Take your inlet duct off, grab the turbo shaft and see if you can move it around at all.
Reply
Old Aug 5, 2005 | 10:36 PM
  #14  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Originally Posted by rrx777
Im gonna check the ignition next the car has na trailing and leading packs so maybe thats it. reason I thought it was the waste gate is that the car has never boosted past 11psi then when the problem started it shot to 15psi under very lite throttle.
The NA coil packs are the same, as SonicRaT mentioned.
But PLEASE check the leading spark to see if it's firing.
When the leadings don't fire, it's like running retarded (pulled-back) ignition timing; the engine will make all kinds of boost, but there will be little power.


-Ted
Reply
Old Aug 5, 2005 | 10:43 PM
  #15  
tIIsleeper's Avatar
pp
Tenured Member 10 Years
 
Joined: Aug 2005
Posts: 768
Likes: 0
From: Central Massachusetts
it sounds like there isnt any oil getting to the turbo
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM
rxlevi7
New Member RX-7 Technical
4
Sep 26, 2015 07:28 AM




All times are GMT -5. The time now is 07:29 PM.