whats the max horse power on a 1991 gxl?
#1
Junior Member
Thread Starter
Join Date: Feb 2002
Location: CONNECTICUT
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
whats the max horse power on a 1991 gxl?
hey guys, i have a 1991 rx-7 gxl, i just bought it and this is my first rotory! i had a talon tsi, well any ways i wanna know what parts will add the most bang for my buck.
AND I WANT TO KNOW WHAT AND WERE ARE THE EMMISSION PARTS ON THE RX7. I NEED TO KNOW WHAT PARTS WILL BRING ME TO AT LEAST 230 HP
THANKS
CHRIS
AND I WANT TO KNOW WHAT AND WERE ARE THE EMMISSION PARTS ON THE RX7. I NEED TO KNOW WHAT PARTS WILL BRING ME TO AT LEAST 230 HP
THANKS
CHRIS
#2
Senior Member
Join Date: Feb 2001
Location: Tallahassee, FL
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
For anything over 220hp, you're going to have to pull apart the motor and have it ported, get forced induction, or N20.
With every bolt-on in the book and a somewhat streetable exhaust, you can get 200hp. With a 100+db exhaust and every bolt-on you can get close to 220hp.
With every bolt-on in the book and a somewhat streetable exhaust, you can get 200hp. With a 100+db exhaust and every bolt-on you can get close to 220hp.
#3
Well start stripping the car down, get a header(true-dual or go single muffler to save weight) straight pipes back to muffler(s). Intake, cold-air box. Take some more **** off the car. You can try pulleys, elec fan, new radiator. To make some real power your going to need to take the motor apart and port it but you can start out with porting the throttle body. Do a search in the upper right hand corner for TB mod..
#4
WTB S5 N/A FC
Join Date: Oct 2001
Location: College Station, Tx
Posts: 2,778
Likes: 0
Received 0 Likes
on
0 Posts
Weight reduction. Intake, exhaust. Port job or N2O. TII drivetrain. And about $5k to get the 220 hp. Be warned:A 200+ hp n/a will have to have a illegal exhaust, and it will be very loud, and not very streetable. Traffic will be a flaming bitch to drive in! Have fun, and don't kill yourself!
#7
Well someone told me he dynoed his streetported NA at 212rwhp so 220 to the flywheel can be done without a bridgeport.
Heres where they said about the 212rwhp:
https://www.rx7club.com/forum/showth...hlight=212rwhp
Heres where they said about the 212rwhp:
https://www.rx7club.com/forum/showth...hlight=212rwhp
Last edited by Ryde _Or_Die; 03-04-02 at 03:11 PM.
Trending Topics
#8
Senior Member
Join Date: Feb 2001
Location: NA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
You all act like 220 is a hard number to reach! I've seen all motor 300HP 1st gen 12As running around at the track...I know a 13B can do it too...personally, if I was building an all motor application....I'd swap over to the carb setup...full straight exhaust, Jbridge, underdrive pulleys, t2 drivetrain, and get the fuel to go w/ all that..you'll be set...
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
NCross
2nd Generation Specific (1986-1992)
9
09-03-15 03:42 PM