i should know this......but
what exclaly does having water in your oil when on a rotary????

 

Want to explain a little further?

If you actually have water in your engine oil, you have a failed coolant seal or a housing failure at a coolant passageway. If you have a foamy stuff on your dipstick it is not "water in the oil". Not a problem. Just warm the car up fully and it will disappear 'cause it is merely condensation mixing with a little oil on the dip stick.

 

i did not check the dip stick i just took da cap off and there is some white stuff on da looks like oil mixed with water or something ....

 

I would say drain the oil and check it, worst case scenario if you dont have a problem is $25 down the drain and a fresh oil change.

 

white stuff as in gunk around the hole?
Thats normal as far as i know

 

Yea... its condensation in the oil filler neck which isnt too uncommon (happens alot in rx8s)... Check your oil and find out to be sure...