Type Of Oil to use....
#1
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Portland, OR
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Type Of Oil to use....
Ok its the summer time, and lately its getting hot out side. I just got my 7 last thursday from my brother, and I'm going to need an oil change first. I don't like going to jiffy lube, oil can henry and all that cuz they messed my moms car up. So my question is what type of oil should i use when its hot out like this? I heard that using 10 30 is bad when its hot out, but to use that when its starting to get cold. Any info would be helpful
#4
Law Breaker
Join Date: Oct 2005
Location: S.F. Bay Area, California 510
Posts: 3,333
Likes: 0
Received 0 Likes
on
0 Posts
search please next time, as this info is posted in the FAQs...
https://www.rx7club.com/showthread.p...05#post5131205
https://www.rx7club.com/showthread.p...05#post5131205
#5
Rotary Enthusiast
iTrader: (1)
Join Date: Aug 2005
Location: Canada
Posts: 1,315
Likes: 0
Received 0 Likes
on
0 Posts
Grade is not only it.
Use MINERAL BASED oil only. Otherwise it burns to fast and scrapes your housing around the exhaust port. You can also remove the OMP and clogg your holes with screws and use 2 cycle oil mixed with your gas. Its cleaner for the engine also.
Mix is 1/100.
Example, 50litres of gas with 500ml of 2 cycle oil.
I've been doing this for the lst 3 years and it runs great.
Frank.
Use MINERAL BASED oil only. Otherwise it burns to fast and scrapes your housing around the exhaust port. You can also remove the OMP and clogg your holes with screws and use 2 cycle oil mixed with your gas. Its cleaner for the engine also.
Mix is 1/100.
Example, 50litres of gas with 500ml of 2 cycle oil.
I've been doing this for the lst 3 years and it runs great.
Frank.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
20B Forum
8
08-18-15 02:46 PM