hey guys i own an fc and i wanted to know wat else would i need need for a complete TII conversion other then a 13bt,ecu,tranny,intercooler,wiring harness and i also wanted to know it it possible to put in a 13btt in fc im sorry if my question was noobish but iam curious.

 

http://www.rotaryresurrection.com/2n...to_turbo2.html

 

thanks alot idsigloo

 

i still wanna know if its possible to fit a 13btt in an fc

 

anythings possible with money

go to

www.speedmachine.com

they made one
things *****!

just remember anythings possible with enuff dough

oh ya if i were you..and actually are thinking of doing the 13btt...id rather just go 20b,,go ***** out

 

You'll need new mounting brackets to fit the FD engine in a FC.

 

There the same engin they all fit.

 

Wrong, The motor mount mounting provisions are different.

 

Not completely wrong. They do fit. Just, with a **** load of extra work.

 

Seeing as how both these questions have been asked 200 times in the last 4 seconds, I think I'll be closing the thread now.

Answers can be found in the FAQ.

For info about the twin turbo 13B, try searching for "13B REW swap", "FD swap", "twin turbo swap" and variations. Unlike the TII swap, it's far from a bolt-in.