Taking off Switch Cluster, what trouble will I encounter?
02-07-03, 08:32 PM
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: Dallas, Texas USA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Taking off Switch Cluster, what trouble will I encounter?
I need to fix the headlight and wiper switches on my FC. Is it easy to get those off? Can I do it with out having to remove the steering wheel? I was thinking about just taking off the steering column surround and then just removing the Switch Cluster.
Does this sound right?
Thanks.
Does this sound right?
Thanks.
02-07-03, 08:56 PM
#2
Full Member
Join Date: May 2002
Location: Daytona Beach, Florida
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Not to difficult
You'll find three screws on the upper part of the inside of the bezel, then two at the bottom but be carefull because these the little lips that supports these bottom screws brake very easy. Then pull the black bezel surround carefully also and disconnect the swithces, two in the left (light and turn signal) then the two in the right (depending if you car has cruise control and wiper) then you'll have all out. You don't need to take the steering whell off, just be carefull because the plastic material brakes really easy due to age and sun exposure.
Thread
Thread Starter
Forum
Replies
Last Post