s4/s5 swap question
s4/s5 swap question
so i am putting a s4 motor into a s5
i did not change the front cover because i decided to just hook the mop up and tie it out of the way and run pre-mix... that would work, right?
but the waterpump... on the s5, tehre are 2 sensors, and on the s4, ther eis only room for 1 sensor, is it ok to leave the other sensor unplugged?
i did not change the front cover because i decided to just hook the mop up and tie it out of the way and run pre-mix... that would work, right?
but the waterpump... on the s5, tehre are 2 sensors, and on the s4, ther eis only room for 1 sensor, is it ok to leave the other sensor unplugged?
i broke the oil lines and i couldnt get the s4 bolt out
and hten i decided to just rebuild the s5 on the side so i want to keep the s5 as an s5
what does tha thave to do wiht answering my questwion?
and hten i decided to just rebuild the s5 on the side so i want to keep the s5 as an s5
what does tha thave to do wiht answering my questwion?
Last edited by slpin; Jan 30, 2005 at 11:56 AM.
Full Member
Joined: Mar 2004
Posts: 231
Likes: 0
From: MIAMI FLORIDA
Originally Posted by slpin
so i am putting a s4 motor into a s5
i did not change the front cover because i decided to just hook the mop up and tie it out of the way and run pre-mix... that would work, right?
but the waterpump... on the s5, tehre are 2 sensors, and on the s4, ther eis only room for 1 sensor, is it ok to leave the other sensor unplugged?
i did not change the front cover because i decided to just hook the mop up and tie it out of the way and run pre-mix... that would work, right?
but the waterpump... on the s5, tehre are 2 sensors, and on the s4, ther eis only room for 1 sensor, is it ok to leave the other sensor unplugged?
i think you need the mop signal to the ecu on the s5
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM