s4/s5 swap question
so i am putting a s4 motor into a s5
i did not change the front cover because i decided to just hook the mop up and tie it out of the way and run pre-mix... that would work, right? but the waterpump... on the s5, tehre are 2 sensors, and on the s4, ther eis only room for 1 sensor, is it ok to leave the other sensor unplugged? |
kicking it and bouncinga it back to tthe top
|
why dont you just get the s5 front cover.
|
I guess he don't want to take a few minutes and change it.
|
i broke the oil lines and i couldnt get the s4 bolt out
and hten i decided to just rebuild the s5 on the side so i want to keep the s5 as an s5 what does tha thave to do wiht answering my questwion? :rolleyes: |
Originally Posted by slpin
so i am putting a s4 motor into a s5
i did not change the front cover because i decided to just hook the mop up and tie it out of the way and run pre-mix... that would work, right? but the waterpump... on the s5, tehre are 2 sensors, and on the s4, ther eis only room for 1 sensor, is it ok to leave the other sensor unplugged? i think you need the mop signal to the ecu on the s5 |
nevermind... got the answers
|
do share, im doing the opposite and id like to know if one sensor will work when theres two.
|
All times are GMT -5. The time now is 10:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands