2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

s4 omp? limp mode?

Thread Tools
 
Search this Thread
 
Old Apr 24, 2011 | 09:38 PM
  #1  
new2mazda's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2007
Posts: 517
Likes: 0
From: Englewood/Dayton Ohio
s4 omp? limp mode?

was told that my omp may have gone bad i am seeing car go lean and told possible limp mode but didnt think s4 had that issue?
Reply
Old Apr 24, 2011 | 09:47 PM
  #2  
turboIIrotary's Avatar
Rotary Freak
Tenured Member: 15 Years
iTrader: (9)
 
Joined: Feb 2007
Posts: 2,618
Likes: 3
From: dayton,ohio
S4 doesn't have limp mode the omp runs mechanically
Reply
Old Apr 24, 2011 | 09:50 PM
  #3  
new2mazda's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2007
Posts: 517
Likes: 0
From: Englewood/Dayton Ohio
but no sensors to it whatsoever?
Reply
Old Apr 24, 2011 | 09:58 PM
  #4  
turboIIrotary's Avatar
Rotary Freak
Tenured Member: 15 Years
iTrader: (9)
 
Joined: Feb 2007
Posts: 2,618
Likes: 3
From: dayton,ohio
Originally Posted by new2mazda
but no sensors to it whatsoever?
Nope there is a rod coming from the throttle linkage that moves it up and down.
Reply
Old Apr 24, 2011 | 10:03 PM
  #5  
Carzy Driver's Avatar
Law Breaker
Tenured Member: 15 Years
 
Joined: Oct 2005
Posts: 3,333
Likes: 0
From: S.F. Bay Area, California 510
never heard of a s4 mechanical OMP failing, they may leak but never heard of anything worse than that.
Reply
Old Apr 25, 2011 | 05:50 AM
  #6  
bac22's Avatar
Full Member
 
Joined: Aug 2001
Posts: 147
Likes: 0
From: NH
What year is your S4 and what exactly is happening? More detail info about your problem and we'll be able to provide more relevant information in solving it.

Oh...and whoever you're talking to about your S4...STOP...they clearly have no clue regarding the S4!
Reply
Old Apr 25, 2011 | 04:34 PM
  #7  
new2mazda's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2007
Posts: 517
Likes: 0
From: Englewood/Dayton Ohio
a reputable company that has built a few 3 rotors and big fd's sooo i will blame it on me needing to give them more detail.

s4 t2 with vmount, 720 injectors, rtek basic ecu, walbro fuel pump, aeromotive fpr... car goes lean with any throttle beyond light footed and no boost. and i dont mkean 13-14 lean i mean 16+ off chart of my aem uego wideband. and it wont stall but hits a wall at any rpm and boost or no boost.
Reply
Old Apr 25, 2011 | 05:04 PM
  #8  
Zero10's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 231
Likes: 1
From: Calgary, Alberta
What happened or was changed before it started going lean?
Reply
Old Apr 25, 2011 | 05:14 PM
  #9  
turboIIrotary's Avatar
Rotary Freak
Tenured Member: 15 Years
iTrader: (9)
 
Joined: Feb 2007
Posts: 2,618
Likes: 3
From: dayton,ohio
Originally Posted by Zero10
What happened or was changed before it started going lean?
I have worked on this car for a little bit iirc the car has had the same problem when it was basically stock, the only thing we haven't checked so far is the wiring harness and fuel pump voltage at WOT.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew7dg
1st Generation Specific (1979-1985)
3
Aug 6, 2017 01:41 PM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM




All times are GMT -5. The time now is 06:01 PM.