Well I've had mu s-afc installed for a while but haven't ran the car yet. So I will be setting it up pretty soon here but need to know what settings. I searched and came up with flap 5 in and out but not sure on the arrow. Anything else I need to know please add in. Thanks.

 

Arrow up. Check http://www.fc3s.org for a full installation writeup.

Dale

 

05 05 Arrow ^ for s4.

 

arrow is up to the right. and 4 cyl

 

Ummm...which one?

 

they are the same anwser; Flap is 05 05 ... cylinder is 4 arrow is up. On a S4

And set throttle point to 98%low and 99%high or close to that if you have a stock TPS

 

OK, I haven't looked at it yet, but scott said up to the right. Just trying to make sure.

 

it only points 2 ways ... up and down but it points at a angle.

 

Ight, thanks man.

 

OK, now what about under sensor type:

hot wire
flap(got this one-5 in/out)
pressure
karman(can't do anything?)

Thanks.

 

you set it at flap.... if you didn't have an AFM, you would choose one of the others.

 

So what do I leave the others at? If I put them back to 0/0 the car will shut off. Leave them at 1/1 or what?

 

if you set it at flap. then the others are not selected... so it doesn't matter.

 

My biggest question Is what Throttle Position to I set It to (Low/High) for a s4 na?

 

depending on when you want it to switch over to the high throttle.

 

for s4 put it at 98% low, 99% high.

 

ON my ser 4 it is an arrow up and right with Low-90% and High-95%.

 

How did you come up with Low-90% and High-95%?

 

^

 

its a narrow range TPS thats why I have it set that way.

 

Thanks. Sorry about what happened to you on Saturday.