2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Rattle when shifting?

Thread Tools
 
Search this Thread
 
Old Feb 1, 2002 | 07:35 PM
  #1  
Citanul's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 9
Likes: 0
From: OR
Rattle when shifting?

Hey all, what does it mean when I shift I can hear something rattling, like a bolt is loose or something? It's only in low RPM's and in lower gears, like when I put on the gas at about 1500 RPM in 1-3rd. It seems like something is rattling a little and I am kinda worried about it, anyone know whats up?
Reply
Old Feb 1, 2002 | 07:41 PM
  #2  
Taranis's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 314
Likes: 0
From: Mount Vernon, WA
Edit:

Is the sound coming from the shifter or something like when you have the clutch in? Depending on when and where the noise is, it could be anything from your shifter bushings to the pilot bearing or throwout bearing.

Last edited by Taranis; Feb 1, 2002 at 07:44 PM.
Reply
Old Feb 1, 2002 | 10:35 PM
  #3  
Citanul's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 9
Likes: 0
From: OR
It seems like the sound comes from under the car, in the transmission area... and It does'nt rattle the car or shifter at all, just makes a rattling noise, like shaking a bolt in a metal container real fast
Reply
Old Feb 1, 2002 | 11:50 PM
  #4  
rx7_ragtop's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,273
Likes: 0
From: Ft. Worth, Texas, USA, Earth, Solar System...
Probably the heat shields on the cat/exhaust.

Brad
Reply
Old Feb 2, 2002 | 04:42 AM
  #5  
Taranis's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 314
Likes: 0
From: Mount Vernon, WA
Sorry, but more questions:

Does the car shift o.k.? Does the rattling get more pronounced in between gears? Does RPM's change it any?

Sounds to me like a pilot bearing.
Reply
Old Feb 2, 2002 | 05:59 AM
  #6  
Citanul's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 9
Likes: 0
From: OR
The car shifts fine, It seems like the rattle is only in low RPM's below 2k, and it only does it when I apply the gas right after a shift, and it only rattles for about 2-3 seconds... (its not really a big deal, I was just wondering if it was or could lead up to a major problem) Thanks for help so far... I will check to see if the heatshields are loose. Any other ideas a appreciated too.
Reply
Old Feb 2, 2002 | 03:04 PM
  #7  
Taranis's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 314
Likes: 0
From: Mount Vernon, WA
On mine there's an air tube leading from the catalytic converter up to the secondary intake that was sitting too close to the manifold heatshield, causing that rattle. sounds like the same thing...
Reply
Old Nov 21, 2006 | 12:56 AM
  #8  
sintri's Avatar
Senior Member
Tenured Member: 15 Years
 
Joined: Apr 2006
Posts: 429
Likes: 3
From: Northern Virginia
reviving old threads, but hey, I searched, and this is relevant so here goes.

I pretty much have the same problem, I get a rattling pretty much in 2nd and 3rd gear below 3k rpm, occasionally 2.5k, it's pretty consistent sometimes other times don't notice it so much. But the location seems to change primarily somewhere near the engine bay front or other times somewhere in the back. Only happens when the car's in gear and gas is applied, won't sound if you're reving in neutral or clutched in or when you go above 3k/2k+ rpm. Anyone know the problem?
Reply
Old Nov 28, 2006 | 03:57 AM
  #9  
sintri's Avatar
Senior Member
Tenured Member: 15 Years
 
Joined: Apr 2006
Posts: 429
Likes: 3
From: Northern Virginia
anyone? I'm guessing something's lose and causing the engine or tranny to vibrate, though that doesn't really explain why I'm sometimes getting the rattling in the back and sometimes in the front. so..
Reply
Old May 12, 2008 | 11:44 AM
  #10  
brandonvanasten_13's Avatar
Brandon
 
Joined: Mar 2008
Posts: 17
Likes: 0
From: WI
Originally Posted by Citanul
The car shifts fine, It seems like the rattle is only in low RPM's below 2k, and it only does it when I apply the gas right after a shift, and it only rattles for about 2-3 seconds... (its not really a big deal, I was just wondering if it was or could lead up to a major problem) Thanks for help so far... I will check to see if the heatshields are loose. Any other ideas a appreciated too.
Exxact explanation of what happen too me... somebody help us!!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
distr0
Canadian Forum
3
Oct 7, 2015 08:17 AM
Rotafuzz
New Member RX-7 Technical
3
Sep 30, 2015 09:55 AM




All times are GMT -5. The time now is 03:02 PM.