porting hp estimate
03-26-04, 10:12 AM
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: spokane wa
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
porting hp estimate
wel i call a place called j.r.s rotary performance and talked to a guy that told me that if i got a street port/ exaust port and rotors from a 89-91 with a new eccentric shaft and flywheel. that i would be able to get over 200rwhp. does that sound about right? also if i could get that much power how hard would it be to do the porting my self if i got a template.
03-26-04, 10:22 AM
#2
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Power estimates are very difficult and really quite pointless if you ask me because they always differ.
As for porting, it is difficult and unless you have some spares sitting around I wouldn't attempt it. You can find out a ton about porting by going over to www.nopistons.com/forums/ and look at their porting thread.
As for porting, it is difficult and unless you have some spares sitting around I wouldn't attempt it. You can find out a ton about porting by going over to www.nopistons.com/forums/ and look at their porting thread.
03-26-04, 10:30 AM
#3
Senior Member
Join Date: Aug 2003
Location: Alabama just east of B'ham
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
Re: porting hp estimate
Originally posted by cezonetheillest
wel i call a place called j.r.s rotary performance and talked to a guy that told me that if i got a street port/ exaust port and rotors from a 89-91 with a new eccentric shaft and flywheel. that i would be able to get over 200rwhp. does that sound about right? also if i could get that much power how hard would it be to do the porting my self if i got a template.
wel i call a place called j.r.s rotary performance and talked to a guy that told me that if i got a street port/ exaust port and rotors from a 89-91 with a new eccentric shaft and flywheel. that i would be able to get over 200rwhp. does that sound about right? also if i could get that much power how hard would it be to do the porting my self if i got a template.
03-26-04, 10:42 AM
#4
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Oh, that is Judge Ito's place!!?? Yah, pay him to do it and you will have a killer engine. He is one of the prime contributors to the porting thread on the other forum.
Trending Topics
03-26-04, 02:24 PM
#9
S4 now S6 soon...
Join Date: Sep 2003
Location: Bonney lake, WA
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by fg0d
He's way backed up to do that for your engine.
He will most likely tell you to find a place to do it. I know because he told me the same thing.
He's way backed up to do that for your engine.
He will most likely tell you to find a place to do it. I know because he told me the same thing.
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM