2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

popping

Thread Tools
 
Search this Thread
 
Old Mar 10, 2011 | 08:41 PM
  #1  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
KY popping

ok i had to replace the tps to stop my idle surge and it work it runs good,,, but when im going down the road and let off the gas it pops, gargles,bounces, not a bad bounce but like a little nudge.... when i get on gas it goes away... what could be causing this... would it be i need to adjust the idle? what about the screw on throttle body and the others on the rollers? thanks......
Reply
Old Mar 10, 2011 | 09:23 PM
  #2  
slitherz90gxl's Avatar
Resident Rotard
Tenured Member 05 Years
 
Joined: May 2009
Posts: 908
Likes: 0
From: Belleville, Illinois
Originally Posted by joshprather93
ok i had to replace the tps to stop my idle surge and it work it runs good,,, but when im going down the road and let off the gas it pops, gargles,bounces, not a bad bounce but like a little nudge.... when i get on gas it goes away... what could be causing this... would it be i need to adjust the idle? what about the screw on throttle body and the others on the rollers? thanks......
From my experience the tps isn't adjusted correctly, but since you said you replaced that I assume that it is adjusted correctly.
I think the dashpot might need to be adjusted to stop jerkiness after you let off the gas though.....

http://www.1300cc.com/howto/how2/dashpot.htm
Reply
Old Mar 10, 2011 | 10:00 PM
  #3  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
how do you adjust a tps?????? and what is a dapshot? it does not jerk when a let off it just sounds like **** and lags for a better word....
Reply
Old Mar 10, 2011 | 10:22 PM
  #4  
tweaked's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jul 2001
Posts: 948
Likes: 1
From: Memphis, TN
Does it run poorly at idle? you may have a vac leak if so. When i tune my bikes lean or develop an intake leak they always pop on decel. but check your TPS. the Haynes manual will tell you how to do that and many other maintenance things that may solve the problem. Best $18 you can spend on your car.
Reply
Old Mar 11, 2011 | 09:46 AM
  #5  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
is there a way to adjust the tps? and what is dapshot>>>>....
Reply
Old Mar 11, 2011 | 01:43 PM
  #6  
rotary_bünta's Avatar
Rotary Retard
Tenured Member: 15 Years
iTrader: (3)
 
Joined: May 2009
Posts: 702
Likes: 1
From: 3rd rock from the sun
try these links.

http://howto.globalvicinity.com/gv_w...i=58&co=1&vi=1

http://www.johnr.com/tps.html

https://www.rx7club.com/showthread.p...hreadid=235007

next time use the search function or google the damn thing.
and get your self the haynes manual..

sheesh.
Reply
Old Mar 11, 2011 | 01:43 PM
  #7  
tweaked's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jul 2001
Posts: 948
Likes: 1
From: Memphis, TN
You rest. I'll do all the work.
Reply
Old Mar 11, 2011 | 06:12 PM
  #8  
FC_fan's Avatar
Sideways is the only way
Tenured Member 10 Years
iTrader: (2)
 
Joined: Nov 2007
Posts: 958
Likes: 0
From: Vermont
I'll teach a man to fish. make note of the "site:rx7club.com" part in my link. it searches only this site when put after your search terms.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
Jun 3, 2024 03:25 PM
renjiv2
3rd Generation Specific (1993-2002)
57
Jan 25, 2024 03:34 AM
poop2003
3rd Generation Specific (1993-2002)
1
Sep 21, 2015 10:28 PM
BUSTN
General Rotary Tech Support
1
Sep 21, 2015 05:01 PM




All times are GMT -5. The time now is 06:28 PM.