I slid into a curb and fucked up my right rear tire bad...
It makes my car turn when im driving it...
and my car is at a angel driving straight
here are some pic...
Can i just weld it back?
What all will need replaced if i replace it?

 

Wow...judging by that last picture you destroyed your rear hub. That will have to be replaced.

 

Hopefully it's just the toe control hub assembly and can replaced with one from a used vehicle. Replace the unit and see if it brings it back into alignment, if not more parts might be needed.

 

seen that before. Friend rolled his FD and it ripped the wheel from the hub. broke right in that same spot. Replace it asap

 

You broke the cast alum hub and I bet you bent the lateral link too. (not pictured)

 

I'd look for a complete rear control arm with everything attached to it (from a car being parted out or something), maybe even keep a replacement rear subframe on standby in case that's bent too.

 

i have some one who will sale me a auto for like 400 so i can probably get all off it...

 

Lateral link is probably also bent.

Download chapter 13 of the online FSM for SUSPENSION.

 

Okey I changed the tie rod and control arm and spindle ..
It seems to be fine but is vibrating when i drive...
The cv fell out at the diffrental and leaked alot of oil... I think thats what is vibrating
Im probably just going to sale the car now...







I dont know what was fucked up on the a arm but i changed it anyways....it was shoved back ... so something was bent on it.

took about a day to do..

 

so you drove the car without oil in your diff?

 

Slide it into a curb, **** it up, then sale it.

A 240sx is next on the list, am I rite?

 

If had another parts car you should have just dropped the whole damn assembly and replaced it.

Natey...I think we all know the answer to that.

 

Time to get an alignment.

 

No I have another fc3s ... I have three lol