Alright so my two oil injector lines to my s4 going to the housing snapped which is very common and im planning on fixing it but my friend who i told to buy the oil lines isnt coming through.so the other day i was looking for some and i found a thread bout a week ago on the forum with some guy who found a way to make custom ones.I went to look for the thread again and its not to be found.if anyone knows the thread link or just knows the website where to buy the lines and fittings please ull be of great help.Havent had my baby running ever since.He bought some clear lines and the fittings for it made it himself and showed a DIY diagram pretty much.

 

It's in the archive: https://www.rx7club.com/2nd-gen-archive-72/rebuilding-omp-oil-injection-lines-348068/

 

or take the OMP off and run premix

 

hey where in ga do you stay gwinnett area

 

yea i live in duluth.Why? u too?Ive got an white rx7 with a black primered front end.Only rx7 ive sen round here is a 1st gen.

 

all you have to do is put bolts in place of the injectors and in place of the holes on the metering oil pump. you dont have to run premix as long as you have at least 2 working properly.

 

No, this is wrong. You need to have all FOUR oil injectors working properly, or the seals will not be getting proper lubrication. The two on the LIM lubricate the side seals & the two on the housings lubricate the apex seals directly. If you're currently running only 2, engine life will decrease greatly.

 

Why not just buy the lines? They are available from Mazdatrix. Here's the link:

http://www.mazdatrix.com/b62.htm

 

im actually having it fixed tomorrow.but i wasnt running it on premix or just 2 injectors.and about the lines.Theyre way more expensive and crapier than making your own.Eitha way my friend has the lines.I was going to make them until he called me and said to bring it to his shop.Thanks for yalls help though.'preciate it