2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Oil leak down driver side of engine??

Thread Tools
 
Search this Thread
 
Old Jun 12, 2006 | 06:57 PM
  #1  
bamabubba's Avatar
Thread Starter
Boost Blows!!!! Wheeeee!!
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 520
Likes: 0
From: New Brockton,AL
Oil leak down driver side of engine??

The oil is very clean...not dirty at all. The oil is leaking down the driver side onto the top left spark plug. I cant see where its coming from...and I havent pulled the intercooler off to see if I can find the leak. I just found it this afternoon. Any ideas where I should be looking first? Thanks yall.
Jeremy
Reply
Old Jun 12, 2006 | 09:26 PM
  #2  
sar's Avatar
sar
Doin a rebuild.
Tenured Member 05 Years
iTrader: (1)
 
Joined: Aug 2004
Posts: 539
Likes: 0
From: Roswell (atl ) Georgia
My power steering hoses had a small leak, that's really clean oil and on the driver's side.
Reply
Old Jun 13, 2006 | 06:43 AM
  #3  
bamabubba's Avatar
Thread Starter
Boost Blows!!!! Wheeeee!!
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 520
Likes: 0
From: New Brockton,AL
Nope. Not that. Ive got no power steering.
Jeremy
Reply
Old Jun 13, 2006 | 09:15 AM
  #4  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
The two most common locations are the oil filter pedestal and the oil pressure sender.

However you say yours is leaking at the FRONT of the engine? If so, then you may have a more serious problem. Could be as simple as seepage out of the filler neck, a small leak at the front cover gasket or a leak at the dowel pin (requires engine disassembly).

Thoroughly degrease the area so that it's spotless and then start the engine and let it idle. See if you can find where the oil is coming from. It will always be above where you think it is. If you can't find it immediately, go for a little drive and then check periodically.
Reply
Old Jun 13, 2006 | 04:12 PM
  #5  
bamabubba's Avatar
Thread Starter
Boost Blows!!!! Wheeeee!!
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 520
Likes: 0
From: New Brockton,AL
Ok. I'll check those this weekend. I'll have to remove the intercooler to really get a good look wont I?
Jeremy
Reply
Old Jun 13, 2006 | 11:51 PM
  #6  
eriksseven's Avatar
Make Money.
iTrader: (6)
 
Joined: Oct 2003
Posts: 4,137
Likes: 9
From: Seattle
Could be coming from the turbo's "oil feed-line"--which consists of a hard-line running up and over the top of the motor. The leak would likely be coming from the banjo-bolt on top of front-iron, on the drivers-side. If it's ever been removed, it has the propensity to leak if the copper-washer isn't installed perfectly.
Reply
Old Jun 17, 2006 | 02:31 AM
  #7  
bamabubba's Avatar
Thread Starter
Boost Blows!!!! Wheeeee!!
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 520
Likes: 0
From: New Brockton,AL
Ok. Thanks Erik. Ill check it.
Jeremy
Reply
Old Jun 18, 2006 | 12:07 AM
  #8  
prjct87rx7's Avatar
REST IN PEACE DAVE!!!!!!
Tenured Member 05 Years
iTrader: (7)
 
Joined: Sep 2003
Posts: 1,673
Likes: 0
From: las vegas.nevada.
or maybe where the oil fill neck meets the block?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
sypath
3rd Generation Specific (1993-2002)
2
Aug 16, 2015 12:06 AM




All times are GMT -5. The time now is 07:39 AM.