2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

no spark. why?

Thread Tools
 
Search this Thread
 
Old 08-02-09, 10:22 PM
  #1  
Full Member

Thread Starter
iTrader: (3)
 
wmele25's Avatar
 
Join Date: Nov 2006
Location: Denver, CO
Posts: 51
Received 0 Likes on 0 Posts
no spark. why?

so i just bought an na 88. the kid who had it before said it was running fine until one day it just died. he says it has no spark. i bought it for way cheap. i verified no spark, but heres the funny thing. the next day after i bought it i tried just ***** to start it and guess what... it started. i drove it all day that day. the next day it didnt start again. i tried new computer and new coils. nothing. i have another friend whos 88 did the same thing. any ideas?
Old 08-03-09, 12:21 AM
  #2  
Mad Scientist
 
Trupain's Avatar
 
Join Date: Apr 2008
Location: hutchinson, MN
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
I would start by checking to see if you are getting power to the leading coil when the ignition is on.

verify you have no spark then without turning the ignition off check for power at the coil.
Old 08-03-09, 04:54 AM
  #3  
Full Member

 
yudaya's Avatar
 
Join Date: Feb 2007
Location: satown
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
my cas had a bad wire in it a acted like that
Old 08-03-09, 11:20 AM
  #4  
Rotary Freak
 
HAILERS2's Avatar
 
Join Date: Jul 2008
Location: FORT WORTH TEXAS
Posts: 1,660
Likes: 0
Received 1 Like on 1 Post
Go try to start your car and while doing so, STARE at the tach needle. Does it make small movements when trying to start the engine? If it does, then there is spark.

To get spark you need the EGI fuses in the engine bay to be good and the ENGINE fuse in the interior to be good.

You also need the ignition key to feed the IG1 buss in the interior fuse box. If you put the key to ON and then try to turn the turn signals on or the wipers on, and they work, that proves the IG1 buss is getting power from the key. ENGINE fuse is on the IG1 buss is why you'd be interested in doing the above.
Old 08-03-09, 07:37 PM
  #5  
Full Member

Thread Starter
iTrader: (3)
 
wmele25's Avatar
 
Join Date: Nov 2006
Location: Denver, CO
Posts: 51
Received 0 Likes on 0 Posts
thanks guys. ill check all that out when i get back into town
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whinin
General Rotary Tech Support
1
09-23-15 04:09 PM
tctwaites
1st Generation Specific (1979-1985)
5
09-22-15 08:48 PM
freq
Haltech Forum
5
09-13-15 07:45 AM
windom
Adaptronic Engine Mgmt - AUS
4
09-11-15 04:48 AM
FC_DREAMS
General Rotary Tech Support
7
08-30-15 09:12 PM



Quick Reply: no spark. why?



All times are GMT -5. The time now is 07:15 PM.