No Spark
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
something to check out..
find out what impedance the injectors are..
since you have a N/A harness on the car,I am assuming that you have a Resistor pack on the car too?..(silver box,big connector by the passenger front strut,).
The Problem that Can be "overlooked" is THIS: you use HI impedance Injectors and FORGET that there is a Resistor pack on the car..this makes each injector go to 18 Ohms.NOT GOOD.
If you are running HI impedance,splice the pack and By pass it..OR better yet just switch to LO impedance injectors.and run the resistor pack.(ecu sees about 10 ohms per injector).;
find out what impedance the injectors are..
since you have a N/A harness on the car,I am assuming that you have a Resistor pack on the car too?..(silver box,big connector by the passenger front strut,).
The Problem that Can be "overlooked" is THIS: you use HI impedance Injectors and FORGET that there is a Resistor pack on the car..this makes each injector go to 18 Ohms.NOT GOOD.
If you are running HI impedance,splice the pack and By pass it..OR better yet just switch to LO impedance injectors.and run the resistor pack.(ecu sees about 10 ohms per injector).;
Thread
Thread Starter
Forum
Replies
Last Post
Prediict
2nd Generation Specific (1986-1992)
32
Nov 18, 2015 08:41 AM
