2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

No spark

Thread Tools
 
Search this Thread
 
Old May 12, 2006 | 01:26 PM
  #1  
driggy's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 7
Likes: 0
From: Eagle River, Ak
No spark

I've been trying to nail this down for a few years.Usually works fine but with no warning will not start. few days later works like nothing happened. Finally got it isolated to no spark. Are there any parts on the 87s that are more prone to fail, ECU or what would be a distributor. Car has 96000 miles on it.
Reply
Old May 12, 2006 | 01:33 PM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
very unlikely to have no spark if the car is not starting. Much much much more likely that the engine is flooded.

What makes you think there is no spark, and if this is the case are you getting a signal from the ECU to fire the coil???
Reply
Old May 12, 2006 | 03:32 PM
  #3  
driggy's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 7
Likes: 0
From: Eagle River, Ak
I know about the flooding issue. I hooked up a Timing light and no go and put a spare plug on the plug wires and no spark. I thought I checked the inputs to the ECU but I had it confused with the CPU on the driver side so I will recheck that.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Prediict
2nd Generation Specific (1986-1992)
32
Nov 18, 2015 08:41 AM
Aramir
New Member RX-7 Technical
24
Oct 18, 2015 02:39 AM
tctwaites
1st Generation Specific (1979-1985)
5
Sep 22, 2015 08:48 PM




All times are GMT -5. The time now is 05:24 PM.