Need Pic Of A Ported S4 Intake Manifold
#1
Full Member
Thread Starter
Join Date: Oct 2002
Location: largo, florida
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Need Pic Of A Ported S4 Intake Manifold
I GOT all the info and parts to port it but i need some pics so i dont do it to much and crack it. remeber mine is an 86 n/a so i need s4 intake manifold pictures. i would prefer before and after but after is good enogh. please send them at b_aikman23@yahoo.com I all ready searched the site and all the pictures dont come up any more. so please help.
#2
Senior Member
iTrader: (10)
Join Date: Sep 2002
Location: Chicago
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx7club.com/forum/showth...threadid=79511
There. It was done on a 90 na but that shouldn't matter too much.
There. It was done on a 90 na but that shouldn't matter too much.
#5
Rotors still spinning
iTrader: (1)
Those pictures won't help you out at all. It was for an S5 manifold. If you have an S4 then you can't do all of that stuff. You really have to see both of them in person to understand why. The egg shaped thing will not work on an S4 manifold. You are really limited to just gasket matching on an S4. It is very possible to port the mainifolds a great deal but it requires alot of time, effort, and money and doesn't function too well with the stock computer. You'd be much better off getting a standalone ecu first or just swapping to the S5 manifold.
#6
Senior Member
iTrader: (10)
Join Date: Sep 2002
Location: Chicago
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx7club.com/forum/showth...ht=88integrals
There. Those pics should work and they were done on a s4, the same as yours.
Like rotorygod said, all is good but your not going to see a dramatic result. Maybe a few horses on the stock ecu. To see real results you NEED a standalone. But its fun to do it. I did it, don't regret it a bit.
There. Those pics should work and they were done on a s4, the same as yours.
Like rotorygod said, all is good but your not going to see a dramatic result. Maybe a few horses on the stock ecu. To see real results you NEED a standalone. But its fun to do it. I did it, don't regret it a bit.
#7
Full Member
Thread Starter
Join Date: Oct 2002
Location: largo, florida
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
whats required to put on the s5 onto the s4 block besides the s5 manifold. do i need to change anything else or will it fit right on there. also ppl on the forum that dre did the big right up on said they ported there s4. so i thought i would do the same. they said it gave them a differnce in h/p. i just need pics
Thread
Thread Starter
Forum
Replies
Last Post