2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Need body swap insights

Thread Tools
 
Search this Thread
 
Old Feb 25, 2004 | 01:02 AM
  #1  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 94
Likes: 0
From: Kansas city Mo
Need body swap insights

I am going to be swaping pretty much everything out of my N/A into another N/A body without motor or trans. My body is pretty banged up and i found another rx7 with almost perfect exterior but crappy maroon interior that im going to swap out. I just wanted to know if there is anything i need to know about putting my engine and tranny in this other body like wiring or if some parts need certain application methods.
Reply
Old Feb 25, 2004 | 01:05 AM
  #2  
RRTEC's Avatar
Rotartist
Tenured Member 10 Years
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
s4 to s4 very easy. s4-s5 or vise versa not as easy..what year is the donor body?
Reply
Old Feb 25, 2004 | 01:17 AM
  #3  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 94
Likes: 0
From: Kansas city Mo
Its the same body definantly a s4
Reply
Old Feb 25, 2004 | 01:26 AM
  #4  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 94
Likes: 0
From: Kansas city Mo
so i really shouldnt run into any problems, im also gonna put my ecu in it.
Reply
Old Feb 25, 2004 | 01:35 AM
  #5  
RRTEC's Avatar
Rotartist
Tenured Member 10 Years
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
The ecu is probably still in it.....check the psssenger side floor. It should go in smooth in a day max witn the motor bieng out of the donor already....
Reply
Old Feb 25, 2004 | 01:46 AM
  #6  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 94
Likes: 0
From: Kansas city Mo
Is there any parts that need to be grounded or bolted to unpainted metal? because i plan on painting and recoating the whole body.
Reply
Old Feb 25, 2004 | 09:03 AM
  #7  
chimp's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 86
Likes: 0
From: st. louis
Before you pull apart your current car, TAKE PICTURES. You have no idea how much easier it is if you have something to look at while both cars are in pieces and the engine is in the air. Also, don't forget the resistor pack for the injectors. It is located under the airbox.
The only reason I mentione this is because I did a swap from an 87 base to an 88 GXL and that was overlooked on the process.
Reply
Old Feb 25, 2004 | 10:07 AM
  #8  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Be careful with manual versus auto transmissions - the cross-member is different.


-Ted
Reply
Old Feb 25, 2004 | 10:36 AM
  #9  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 94
Likes: 0
From: Kansas city Mo
Thanks i never thought of taking pictures, i have a good digital camera. That should help out alot. The car that im transfering over to was a auto (mines a manual) it still has the shifter that i need to get rid of. Is there anything i need to do about that?
Reply
Old Feb 26, 2004 | 12:01 AM
  #10  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 94
Likes: 0
From: Kansas city Mo
will the cross member be in the way or be somewhat of a pain in the ***
Reply
Old Feb 26, 2004 | 07:55 AM
  #11  
hIGGI's Avatar
Moderator
Tenured Member: 25 Years
iTrader: (7)
 
Joined: Feb 2001
Posts: 4,988
Likes: 18
From: Czech Republic [www.rx7cz.net]
search for auto to manual conversion, it was covered here before
Reply
Old Feb 27, 2004 | 02:10 AM
  #12  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 94
Likes: 0
From: Kansas city Mo
I looked in the search found some info and about my only problem would be the mounting brackets. Unless i could get some i think im just gonna have to wait and find a manual rx7 without motor and trans and near perfect exterior.
This is pretty depressing



Last edited by rxhaven7; Feb 27, 2004 at 02:12 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM
tonka_1956
1st Generation Specific (1979-1985)
1
Sep 2, 2015 05:55 PM
Engine stand ready
New Member RX-7 Technical
3
Aug 14, 2015 10:26 PM




All times are GMT -5. The time now is 04:20 PM.