N/A brake help
#1
Junior Member
Thread Starter
Join Date: Mar 2008
Location: in a house
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
N/A brake help
Ok i know what everyone is going to say. Do more research. I have and i cannot get a black and white answer. Is is possible to put the stock four piston calipers off a TII on a four lug base model? Basicly just bolt on or serious modifying. Appriciate the help!
#2
Moderator
iTrader: (1)
Doing a search for 5 lug brake conversion might give you some info,but to answer your question,yes people have done this but "I believe" you need to change hubs with 5 lugs,rotors for 5 lug hubs,calipers with 4 pistons and possibly the flexible brake hoses. It's not really a simple mod but it can be done.
#3
strike up the paean
4 pots are 5 lug
rotor is not the same size on 4 lug.
in other words you need to swap to 5 lug or redrill the new rotors for 4 lug
for parts and procedure, search
https://www.rx7club.com/showthread.p...ght=5+lug+swap
rotor is not the same size on 4 lug.
in other words you need to swap to 5 lug or redrill the new rotors for 4 lug
for parts and procedure, search
https://www.rx7club.com/showthread.p...ght=5+lug+swap
#7
whats a Turbo V?
i will check tommarow when i get up to my uncles(where my 4lug 87 is) i'll try my 4 pots(awaiting rebild kit) on them. you might need to find now rotors to use them.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM