My Tempeture gauge is not reading anything
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: Orlando Florida
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
My Tempeture gauge is not reading anything
I recently installed a street porrted motor into my 1990 GTU. Before I took my other motor out the Tempeture gauge was working fine. Now it does not read anything at all. When the car is on the, I see if the wire has electricity and it does. Im pretty sure that it is the tempeture sending unit that screws into the motor but I want to make sure first. Does anyone know if this is the problem? Thanks, Nelson
#6
Moderator
iTrader: (1)
I agree with NZCONVERTIBLE. The Coolant Sender Unit or the wire leading to It would be suspectible.
Check to see If the wire Is on snug.
I replaced all my coolant sensors as cheap(?) assurance.
- Water Temperture Switch
- Water Thermo Sensor
- Coolant Level Sensor
- Coolant Sender Unit
Check to see If the wire Is on snug.
I replaced all my coolant sensors as cheap(?) assurance.
- Water Temperture Switch
- Water Thermo Sensor
- Coolant Level Sensor
- Coolant Sender Unit
Last edited by silverrotor; 05-31-02 at 12:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post
josef 91 vert
2nd Generation Specific (1986-1992)
1
08-29-15 12:22 AM