my car its stumbling and its not going over 3k
#4
Resident Rotard
Join Date: May 2009
Location: Belleville, Illinois
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
If it is a s4 that ground is under the intake manifold and if it is a s5 it should be on a little extension on the top of the uim.
Though you might want to make sure you aren't running limp mode if it is a s5.
I forgot to plug my maf back in one day and it was running like that.
Though you might want to make sure you aren't running limp mode if it is a s5.
I forgot to plug my maf back in one day and it was running like that.
#6
make sure your maf is connected. thanks guys i got it fixed, i made a test light just like the one used to read error codes and i connected it to the tps tester connector and adjusted it like the fsm said and then adjusted the idle speed and its perfect now thanks guys
#7
Rotary $ > AMG $
iTrader: (7)
Limp MOde
You should check the codes from the ECU first. The S5 MOP fault is a distinct possibility.
http://www.1300cc.com/howto/how2/codes.html
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/s5-mop-ecu-failure-diagnosis-710938/
http://www.1300cc.com/howto/how2/codes.html
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/s5-mop-ecu-failure-diagnosis-710938/
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM