msd blaster coils
msd blaster coils
hi, im just curious if anyone has blaster coils on there fc, im maybe going to put some on my TII but i want to know if there worth it. if anyone has some please tell me you're experience with them. thanks
Originally Posted by Angel Guard Racing Team
I got two blaster2's and two 6al's (one for each coil) on mine...
Rotary Enthusiast
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
Work great... But I must tell you... My setup is very diffrent from the usual... I'm running an early distributor because I got rid of the ecu and went carb on my TII...
why did you change to carb, having to much problems whith fuel injection?
by the way im looking for the blaster coils and msd because i want to run a little more. right know my TII has racing beat turbo back(running 11 psi on stock turbo), safcII,turbosmart bov. im going to add 720cc secondary injectors, walbro255, 2 blaster coils and a msd, 50mm external wastegate. im looking to take the max hp on my engine before i upgrade the turbo or port the egine. you got any other tips you can give me. thanks
by the way im looking for the blaster coils and msd because i want to run a little more. right know my TII has racing beat turbo back(running 11 psi on stock turbo), safcII,turbosmart bov. im going to add 720cc secondary injectors, walbro255, 2 blaster coils and a msd, 50mm external wastegate. im looking to take the max hp on my engine before i upgrade the turbo or port the egine. you got any other tips you can give me. thanks
Rotary Enthusiast
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
I had too many dissapointments with the ecu and a bad harness... Long story but it makes 300 RWHP @ 12psi... Remember the msd coils only have one wire for each plug... Are you planning on changing both coils or just trailing??? I would get an aftermarket FPR Aeromotive works great... 720 secondaries will do good along with the walbro... Might also want to consider running a bigger steel braided fuel line from the tank...
Trending Topics
Rotary Enthusiast
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
Deberias pasar por Jimmy Bou y alli te pueden decir todo lo que puedes y no puedes hacer, yo le quite el ECU pues me estaba fastidiando mucho. O si me das hasta manana te explico lo que puedes hacer y lo que no con mas calma pues estoy muerto del sueño, fui a la pista de Ponce a dar la vuelta y me quede todo el dia jejeje.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
nycgps
3rd Generation Specific (1993-2002)
30
Sep 29, 2015 12:02 AM
killerrx710
2nd Generation Specific (1986-1992)
1
Sep 24, 2015 10:57 PM




