im looking for the most complete block off kit including the coolant block off plate because im running a oil turbo. who sells a good looking block off set?

 

http://www.2751engineering.com/cart/....php?groupid=3

best quality block off plates i have seen. they come with the hardware too. the split air pipe block off plate will work to block off the stock coolant feed line for the turbo.

 

the 3/8" coolant return port for the turbo (on the water pump housing) can be plugged with JB weld or a high quality silicone vacuum cap (McMaster Carr sells them). Do not just use an autozone vacuum cap, those don't stand up to heat well.

 

+1

mine leaked after a couple thousand miles and took me a little while to find the source of the leak. you can also just run a line from it to the nipple on the rear iron, probably less likely to leak that way.

 

http://banzai-racing.com/store/FD_block_off_plates.html

Came with all the hardware to install, blocked of all that I needed for non-sequential and also included the single turbo rear turbo oil return line blockoff...

Extra maybe? hehe

 

thats fd stuff ^^

 

what about thiss? http://cgi.ebay.com/ebaymotors/Rx7-R...mZ120513318325 will this have every thing i need it appears to have one more plate than the other kits suggested ?

 

http://banzai-racing.com/store/FC_block_off_plates.html