logicon help
Thread Starter
Junior Member
Joined: Jan 2004
Posts: 14
Likes: 0
From: sin city
logicon help
hi first time poster been lurking round the site for a while i just got my fc 88 base model $300 at a public auction here in vegas had the car four days and some kids broke into it and stole my radio and ripped my logicon apart too my question it does anyone have a pic of a logicon where the main pigtail the one that plugs in the harness behind the dash. i need pic of the end thats soldered in the board they ripped the wire out rigth there or can someone tell me the order of the wires left to right or viseversa i have no heat or a/c i pluged everything back in but that one harness and i have controls but no motor control anyhelp would be appreciated.
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Are you talking about harness #3, the one that feeds into the dash, not one of the ones that plugs directly into the back of the logicon?
And you need the layout of the harness #3 as it solders into the main logicon board?
And you need the layout of the harness #3 as it solders into the main logicon board?
Senior Member
Joined: Apr 2003
Posts: 523
Likes: 0
From: New Idaho
If we're talking about the same board with a linear single slot whiteplug.....
From left to right with the logicons backside oriented rightside-up its:
green w/white stripe
solid yellow
blue w/whitestripe
solid green
blue w/yellow stripe
blue w/red stripe
light green w/ redstripe
brown w/red stripe
green w/yellow stripe
green w/red stripe
blue w/black stripe
solid light green
yellow w/red stripe
empty slot
brown w/yellow stripe
I can take a picture of it later when my camera batteries recharge.
Thread Starter
Junior Member
Joined: Jan 2004
Posts: 14
Likes: 0
From: sin city
yeah mines FBO1 so that should do it just gotta soldered it back toghter in the moring i gotta finsh my road race bike tonite i got way too many projects going on ICEMARK Templeswain you guys are gods among men thanks for the help.
Trending Topics
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
On the board starting left, going right...
Brn/Yel (\)
Blank
Yel/Red (|)
LightGrn (HO)
Blu/Blk (|)
Grn/Red (|)
Grn/Yel (|)
Brn/Red (VB)
LtGrn/Red (C0)
Blu/Red (11)
Blu/Yel (01)
Grn (02)
Blu/Wht (12)
Yel (04)
Grn/Wht (03)
Brn/Yel (\)
Blank
Yel/Red (|)
LightGrn (HO)
Blu/Blk (|)
Grn/Red (|)
Grn/Yel (|)
Brn/Red (VB)
LtGrn/Red (C0)
Blu/Red (11)
Blu/Yel (01)
Grn (02)
Blu/Wht (12)
Yel (04)
Grn/Wht (03)
Senior Member
Joined: Apr 2003
Posts: 523
Likes: 0
From: New Idaho
One note though.
Icemarks picture is of the board as if it was facing you through the front of logicon. That's why his order is reversed.
Mine, since I still have my face on as an intact logicon is from the backside. So my order is like Icemark's picture from its backside.
Icemarks picture is of the board as if it was facing you through the front of logicon. That's why his order is reversed.
Mine, since I still have my face on as an intact logicon is from the backside. So my order is like Icemark's picture from its backside.
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally posted by Templeswain
One note though.
Icemarks picture is of the board as if it was facing you through the front of logicon. That's why his order is reversed.
Mine, since I still have my face on as an intact logicon is from the backside. So my order is like Icemark's picture from its backside.
One note though.
Icemarks picture is of the board as if it was facing you through the front of logicon. That's why his order is reversed.
Mine, since I still have my face on as an intact logicon is from the backside. So my order is like Icemark's picture from its backside.
The blank pin is the quide
Thread
Thread Starter
Forum
Replies
Last Post