I did the emission removel on my 87 TII, on the back side of the lim the firewall side what is the part called and can that be block off. I belive a block off plate came with the kit. if it can be removed what do i do with the hose that go to it. BTW i search and could not fine anything. of coarse i did not now the part name. Thanks

 

Got a picture?

 

no don"t have pic.

 

Look in the online fsm's (in the faqs) and see if you can find the part name. That helps a lot to figure out how to help you and how to search.

 

it looks like it mite be the the egr from Rotary Resurrection write up on emission removel.

 

It's the Air Supply Valve. It increases idle speed when you use the power steering to stop the engine bogging or stalling. If you have power steering there's no good reason to remove it. It's not like it's in the way; you can barely see it.

 

There no power steering so what do i do should i leave it or get rid of it. What do i have to do to get rid of it . Thanks

 

Since it's no longer serving a purpose it's up to you if you can be bothered removing it. You'll need to make or buy a block-off plate to replace it.

 

NZconvertible so your saying that the egr is the same as the Air Supply Valve, am i getting this right. If so i been away from the car for some time, and don't remmeber if there is anything hooked up to it if there is what do i do with whatever hooked up to it. Thanks for any help. Tony

 

My apologies, I had a total brain-fart. I was thinking UIM, not LIM.

You are of course referring to the EGR valve. If passing emissions is not an issue then you can remove it. You'll still need a block-off plate for it. Cap the line attached to it.

 

heh, beat me to it. i was thinking EGR, most block off kits don't come with ASV block offs.

 

I don't need to to pass emissions and i do have a block of plate. So all i need to do is cap off the line that feeds the egr nothing more then that. BTW You don't have to apologize to me, I appreciate all the knowledge and help you give use less fortunate rx7 oweners. Im shure i'll have a lot more question in the furture. Thanks again Tony