ok so i just got my car to where i can trouble shoot. it is leaking out on the hotside. just filled it a few day's ago and got my injectors put back in then i go to start it and it is spewing oil out of the exhaust and found a small puddle under the hotside.
it is spewing white smoke that smells like gas when i start it and it wont maintain idle. any ideas anybody?

I will get pics and a video when i get home.

 

Any help at all im dreading it being the oil seals.

 

Also info I forgot. Gxl>t2 swap 88 car 87 engine, emmision removal turbo back exhaust all else stock.

 

the intake and exhaust enter/exit on the same side of the engine.
there is no hotside.

 

Ya I didn't have the intake pictured when I was talking.

 

But ya under the turbo. I have searched and really need some help.

 

If it's spewing that much oil, either one of the oil lines around the turbo is bad and/or the oil seals in the turbo/engine are bad.

white smoke means coolant is getting into the combustion chamber. Start with the "champagne bubbles" test with the upper coolant cap removed to check for a coolant leak inside the engine. Then make sure all your oil lines are sealed properly and those aren't leaking.

If you can borrow a turbo from a friend that would let you eliminate the turbo as the cause. Because if it's not the turbo, its the motor.

 

okay so i put some more oil on it and it creates more of the smoke with oil in it. so what does that mean exactly? i am gonna see if i can replace the turbo with a s5 unit and see if that makes any differance.