Can anyone take some pictures of these for me? I am looking to buy both these things and I have a guy in Japan that thinks he might be able to find them for me but he needs pictures of them. Thanks

 

there are 4 boost sensors... 86-88 N/A. 86-88 turbo. 89+ N/A and 89+ turbo...

you'd need to find the part # for the one you need cause they all look the same.

also only the turbos had knock sensors and your profile says you have an N/A...

 

Yes but thats the beauty of a turbo engine swap Anyways im looking for a series 5 knock sensor, and I realize all the boost and pressure sensors look the same but they guy said he needed a picture and I know the boost sensors have the number written on the top, so that would help find the part number. If anyone can help thats cool if not Im sure I have a buddy around here with a turboII that will let me pull the passenger side carpet up

 

Anybody? All I really need is the part number for the knock sensor and a picture if possible. And if you happen to have the part number for the boost sensor cool but if not I can find it on a friends car.

 

I've already got my carpet up and pulling all the TII stuff from an 88 AE. Tell me where these are located and I'll try to get the p/n for you.

Also, www.iluvmyrx7.com has parts fiche so you might be able to get the p/n there.

I should be getting a digital camera next week, waiting on CompUSA to get them in stock.

Scott

 

Well I dont have a turboII but I would assume it should be right by the ECU. The boost sensor is going to be on the strut tower on the passenger side. Its the little back box that says boost sensor on it and has a vacuum line running to it from your manifolds.

 

the knock box on an 87-88 is under the carpet.the knock box or the 89-91 ight built into the computer

 

partially incorrect...

The Knock box on a S4 car is located high above in the passengers kick panel.

But you are correct in that the knock computer/box on a S5 is built into the CPU.

However he was asking for the knock sensor, which looks kinda like the coolant sensor on the rad, but in this case it is attached to the block.

 

Am I going to need two knock sensors? One per housing? And if I am buying a J-spec engine is there any chance they would still be on the block since it comes with complete accesorys?

 

Also, so I shouldnt have to look for the knock box to buy anymore right? Cause im getting a series 5 ECU and you said its built into it right? Thanks for you help by the way Icemark.

 

Yeah the S5 knock computer is built into the S5 turbo ECUs.

there is only one sensor for the whole motor. On every J-spec I have ever seen it is still on the engine.

 

Ah thank you thank you thank you. Just saved me some time from trying to find two parts I wouldnt have needed.