intercooler piping
#1
La FIEBRE
Thread Starter
Join Date: Jun 2006
Location: New York
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
intercooler piping
Where To Buy A Decent Intercooler Piping Kit, Is For A 3 Inch, Im Doing A 13bre Swap If That Helps Any, I Guess A Few Links Would Be Cool.
#2
Rotary Enthusiast
Join Date: Nov 2003
Location: orlando, fl.
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
ive seen this on ebay for a pretty good price, (polished aluminum), i was thinking of buying it, check on there
1 of many
http://cgi.ebay.com/ebaymotors/3-0-I...spagenameZWDVW
1 of many
http://cgi.ebay.com/ebaymotors/3-0-I...spagenameZWDVW
Last edited by Aaron Cake; 12-31-07 at 09:12 AM. Reason: Merge two posts
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
3" is is a bit big unless you are running gigantic turbo and lots of boost. You'll get better response with more reasonable 2.5" piping and it's far easier to install.
#6
Banned. I got OWNED!!!
The price of aluminum from burns is ridiculous. I don't know why so many people praise them.
A 1' piece of 3" tubing from them runs $16.52
I can buy a piece from my supplier of the SAME GRADE SAME ALLOY for $11.05. The greatest is thier 4.5" striat tube for $86.62!!! Onlinemetals = $18.24. Tricky part is finding them with bends Regardless though I feel Burns is too expensive.
Personally I bought one of the e-bizzle kits where I could pic all my bends and sizes etc etc etc, cheap couplers which are going to be replaced and of course decent t-bolts. End result was nice though - A few pics here
A 1' piece of 3" tubing from them runs $16.52
I can buy a piece from my supplier of the SAME GRADE SAME ALLOY for $11.05. The greatest is thier 4.5" striat tube for $86.62!!! Onlinemetals = $18.24. Tricky part is finding them with bends Regardless though I feel Burns is too expensive.
Personally I bought one of the e-bizzle kits where I could pic all my bends and sizes etc etc etc, cheap couplers which are going to be replaced and of course decent t-bolts. End result was nice though - A few pics here
#7
Tear you apart
iTrader: (10)
The price of aluminum from burns is ridiculous. I don't know why so many people praise them.
A 1' piece of 3" tubing from them runs $16.52
I can buy a piece from my supplier of the SAME GRADE SAME ALLOY for $11.05. The greatest is thier 4.5" striat tube for $86.62!!! Onlinemetals = $18.24. Tricky part is finding them with bends Regardless though I feel Burns is too expensive.
Personally I bought one of the e-bizzle kits where I could pic all my bends and sizes etc etc etc, cheap couplers which are going to be replaced and of course decent t-bolts. End result was nice though - A few pics here
A 1' piece of 3" tubing from them runs $16.52
I can buy a piece from my supplier of the SAME GRADE SAME ALLOY for $11.05. The greatest is thier 4.5" striat tube for $86.62!!! Onlinemetals = $18.24. Tricky part is finding them with bends Regardless though I feel Burns is too expensive.
Personally I bought one of the e-bizzle kits where I could pic all my bends and sizes etc etc etc, cheap couplers which are going to be replaced and of course decent t-bolts. End result was nice though - A few pics here
Piping usually ends up costing under $100 anyhow.
To each their own.
Trending Topics
#8
Play Well
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
I wish he would make a header for an NA rotary, or maybe a mani for the turbo cars that would make my day. From what i understand he is one of the best header designers in the world.