injector insulators, needed?
09-13-02, 11:48 PM
#1
what 7
Thread Starter
injector insulators, needed?
Hey guys, I just got my injectors back from Marren Fuel Injection today, and they took off my 2 month old insulators and threw them away. Will the injectors seat and seal okay? Or should I call Marren and ask them for new insulators? Or what?
Kinda pissed..
Kinda pissed..
08-12-03, 09:54 PM
#5
Before anything, did they replace the Filter and O-ring too?
As for the Upper/Lower Grommets, some places don't stock the particular sizes but that doesn't allow them to toss them out. I'd demand a credit at the shop or funds to buy new ones.
Heck, I just had my TII FI's machined cleaned and they placed the old ones In the 4 FI zip lock bags I provided to them.
As for the Upper/Lower Grommets, some places don't stock the particular sizes but that doesn't allow them to toss them out. I'd demand a credit at the shop or funds to buy new ones.
Heck, I just had my TII FI's machined cleaned and they placed the old ones In the 4 FI zip lock bags I provided to them.
08-12-03, 09:56 PM
#6
built my own engine
i think i'm onto something, if you don' thave the insulators, you will have a vaccum leak...and that will cause problems
am i wrong?
my symptoms are:
i have to hold the throttle to the floor to get it to crank, and 1-3.5k rpms it wants to stuttter and die/bog and backfire, but above that it starts to pickup a little better, but it's never certain
am i wrong?
my symptoms are:
i have to hold the throttle to the floor to get it to crank, and 1-3.5k rpms it wants to stuttter and die/bog and backfire, but above that it starts to pickup a little better, but it's never certain
08-12-03, 10:41 PM
#7
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
No insulators? Don't even bother trying to drive the car. Your going to have a big vacuum leak in four places. Buy some from Mazdatrix.....or????PePBoys????Autzone?????? I know that Steve's Foriegn Car Parts on Vickery carry them.
Trending Topics
08-12-03, 10:45 PM
#8
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
You have a bad sending unit/float. Buy one from the wreckyard or Mazdatrix.com. Or, trouble shoot from the free, online factory manual at http://www.iluvmyrx7.com
Thread
Thread Starter
Forum
Replies
Last Post