Ill make it simple
#1
She's alive
Thread Starter
Join Date: Mar 2003
Location: Illinois
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Ill make it simple
since the s5 service manual on 1lumyrx7 doesnt give a good wiring diagram can anyone scan/send me a diagram of the wires going into the plugs: fem-01 and fem-02 for an 89 n/a. I heard that the 1990 service manual has a diagram but im not sure. Any help would be great for this is the last of my S4TII to S5 N/a swap
#3
She's alive
Thread Starter
Join Date: Mar 2003
Location: Illinois
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
I already have the ecu wired up i need to now connect my 87 TII harness to the 89 Dash harness. The connecting plugs are fem-01 and fem-02. what i am looking for is a diagram like the one in the FSM for the ecu connectors that shows the color and source of these wires so i can cross reference them and connect the harnesses
#4
Former Moderator. RIP Icemark.
Fem-01 and Fem-02 are S4 harness plugs... what harness/plug are you looking for?
X-10 and X-11 are the connectors between the front harness and emissions harness on a 89+
and X-06, X-07, X-08 and X-09 are the connectors between the engine and front harness on a 89+
X-10 and X-11 are the connectors between the front harness and emissions harness on a 89+
and X-06, X-07, X-08 and X-09 are the connectors between the engine and front harness on a 89+
Last edited by Icemark; 04-29-04 at 09:52 PM.
#5
She's alive
Thread Starter
Join Date: Mar 2003
Location: Illinois
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
yea the x plugs are the ones i need. Like i said the 89 FSM doesnt show anything about these plugs. What i am doing is matching up the wires and splicing them. I have the wires for the FEM plugs figured out but i dont know where the wire on the 89 plug go.
Trending Topics
#11
She's alive
Thread Starter
Join Date: Mar 2003
Location: Illinois
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
diagram for x-10 and x-11 connectors
If anyone has a diagram of the x-10 and x-11 connectors on a 89 GXL. I actually only need the source of the wires comming from the front/dash harness to the connectors i have the diagram of the emmison side. If anyone can give me this i sure do need it for tommorrow.
#13
Former Moderator. RIP Icemark.
my scanner is down... I'll see if I can get it working sometime this weekend
But the wire colors are almost exactly the same in all years...
But the wire colors are almost exactly the same in all years...
#18
Paper mache seals
iTrader: (1)
Join Date: Apr 2006
Location: Linthicum
Posts: 682
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, Im kind of in the same boat, in the middle of a weird swap, and trying to make sure I get all the bases covered. Even looking through the entire wiring diagram, I can only find about half the wires running through the Front to Engine/Emissions harnesses....
Thread
Thread Starter
Forum
Replies
Last Post
Claudio RX-7
Haltech Forum
5
04-23-19 02:50 PM