RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Ill make it simple (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/ill-make-simple-300867/)

RotaryPower27 04-29-04 08:15 PM

Ill make it simple
 
since the s5 service manual on 1lumyrx7 doesnt give a good wiring diagram can anyone scan/send me a diagram of the wires going into the plugs: fem-01 and fem-02 for an 89 n/a. I heard that the 1990 service manual has a diagram but im not sure. Any help would be great for this is the last of my S4TII to S5 N/a swap

WAYNE88N/A 04-29-04 08:22 PM

try the wiring diagrams on fc3s org- they print out the "right way"

RotaryPower27 04-29-04 09:19 PM

I already have the ecu wired up i need to now connect my 87 TII harness to the 89 Dash harness. The connecting plugs are fem-01 and fem-02. what i am looking for is a diagram like the one in the FSM for the ecu connectors that shows the color and source of these wires so i can cross reference them and connect the harnesses

Icemark 04-29-04 09:45 PM

Fem-01 and Fem-02 are S4 harness plugs... what harness/plug are you looking for?

X-10 and X-11 are the connectors between the front harness and emissions harness on a 89+

and X-06, X-07, X-08 and X-09 are the connectors between the engine and front harness on a 89+

RotaryPower27 04-29-04 10:01 PM

yea the x plugs are the ones i need. Like i said the 89 FSM doesnt show anything about these plugs. What i am doing is matching up the wires and splicing them. I have the wires for the FEM plugs figured out but i dont know where the wire on the 89 plug go.

Icemark 04-29-04 10:15 PM

http://www.mazdamark.com/S5plugs2.JPG
http://www.mazdamark.com/S5plugs3.JPG

RotaryPower27 04-29-04 10:22 PM

You are the man. Thanks a million you saved my ass.

Icemark 04-29-04 10:38 PM

remember those are s5 wires/plugs

RotaryPower27 04-29-04 11:08 PM

yea that is exactly what i have been searching for. I really appreciate it.

RotaryPower27 04-30-04 12:02 AM

Icemark sorry to be a pain, but if you have access i need to know what these wires go to. Just on the dash harness side of the connector.

RotaryPower27 04-30-04 01:40 AM

diagram for x-10 and x-11 connectors
 
If anyone has a diagram of the x-10 and x-11 connectors on a 89 GXL. I actually only need the source of the wires comming from the front/dash harness to the connectors i have the diagram of the emmison side. If anyone can give me this i sure do need it for tommorrow.

RotaryPower27 05-01-04 10:09 PM

anybody have the schematics

Icemark 05-01-04 11:04 PM

my scanner is down... I'll see if I can get it working sometime this weekend

But the wire colors are almost exactly the same in all years...

RotaryPower27 05-02-04 12:04 PM

That would be great. The only FSM wiring diagram i found was on mazdatrix for like $111 but if you have it that would be really helpfull

RotaryPower27 05-03-04 06:16 PM

went to the mazda dealership today to maybe make copies. They told me to go the library. :bigthumb: Thanks Mazda!!!!

RotaryPower27 05-04-04 12:36 AM

Bump...just so it doesnt get forgotten....Thanks

TehMonkay 02-02-13 10:23 PM

and the picture is dead, and this is exactly what i was looking for

NoMorePoison 03-08-13 08:54 AM

Yeah, Im kind of in the same boat, in the middle of a weird swap, and trying to make sure I get all the bases covered. Even looking through the entire wiring diagram, I can only find about half the wires running through the Front to Engine/Emissions harnesses....


All times are GMT -5. The time now is 08:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands