Hookup up 6hp shop vac to exhaust side of turbo...
#28
777** The Anti-rice
Thread Starter
Join Date: Sep 2002
Location: Seattle, WA
Posts: 2,100
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hugo20
turbo like spinning with no oil...
#30
I wish I was driving!
Originally Posted by Aaron Cake
Just an aside, but a 6 HP Shop Vac is a serious vacuum! That's 4470W, which is 37.25A from a 120V outlet. Which is also well past the maximum rating of the NEMA 5-15R, 5-20R or 5-30R outlets found in most houses and garages. Something tells me that vacuum doesn't actually make 6 HP.
The rated "peak" hp is usually a far cry from the actual power the unit produces. This is one of the reasons many suppliers of air compressors, for example, give the manufactuer's claimed hp and an "real horsepower" rating.
#34
777** The Anti-rice
Thread Starter
Join Date: Sep 2002
Location: Seattle, WA
Posts: 2,100
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Steel
oh guys.. i had a wheel bearing in my hand the other day, and like... i spun it, but it had no grease, you think i broke it?!?!
Exactly.
#36
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Originally Posted by Steel
oh guys.. i had a wheel bearing in my hand the other day, and like... i spun it, but it had no grease, you think i broke it?!?!
#37
Rotary Freak
Join Date: Mar 2001
Location: LA.,California USA
Posts: 1,611
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NZConvertible
The oil is not there to protect against heat. It's there to stop two metallic surfaces, one moving at very high speed, from touching each other. Which they were...
#40
Rotary Enthusiast
Join Date: Oct 2003
Location: Wichita, KS
Posts: 1,183
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Steel
oh guys.. i had a wheel bearing in my hand the other day, and like... i spun it, but it had no grease, you think i broke it?!?!
#42
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
I just watched the video...Scary...That can't be good for the bearings, regardless of heat. I doubt there's enough oil in there to keep an oil film in place...so you're probably close to running metal on metal.
Thread
Thread Starter
Forum
Replies
Last Post