heres a good flywheel question
#1
pow sputter sputter
Thread Starter
Join Date: Oct 2007
Location: Albuquerque, NM
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
heres a good flywheel question
s4 na engine swapping out clutch and flywheel to a turbo clutch and flywheel
heres the question
where can i get a flywheel remover
this one has got me stumped
heres the question
where can i get a flywheel remover
this one has got me stumped
#2
You do not need one. I used a 5lb sledge. It does not take alot of force but it does take a rythem. Do not hit the clutch surface, but rather around the outside. The continual vibration will get it to come loose. Single hard bangs do nothing.
#4
Wish he had a running rx7
Join Date: Nov 2006
Location: Oklahoma City
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
First of all do you have the turbo transmission. You need that if you are using a turbo flywheel.
Use a hammer or something and just knock the crap out of it.
Use a hammer or something and just knock the crap out of it.
#5
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Copied and pasted directly from the FAQ:
How do I remove the flywheel nut and flywheel?
The flywheel nut is torqued to approximately 350 Ft-LBs and is 54MM or 2 1/8" in size. You will need a large breaker bar or impact gun and then some means to keep the flywheel still as the nut is spun off. The flywheel can then be pulled off with a puller or pried off from behind. See the following topics:
https://www.rx7club.com/forum/showthread.php?t=559740
https://www.rx7club.com/forum/showthread.php?t=552288
https://www.rx7club.com/forum/showthread.php?t=485098
https://www.rx7club.com/forum/showthread.php?t=483905
https://www.rx7club.com/forum/showthread.php?t=399637
https://www.rx7club.com/forum/showthread.php?t=408309
https://www.rx7club.com/forum/showthread.php?t=273219
https://www.rx7club.com/forum/showthread.php?t=244162
https://www.rx7club.com/forum/showthread.php?t=176418
https://www.rx7club.com/forum/showthread.php?t=169323
https://www.rx7club.com/forum/showthread.php?t=83807
How do I remove the flywheel nut and flywheel?
The flywheel nut is torqued to approximately 350 Ft-LBs and is 54MM or 2 1/8" in size. You will need a large breaker bar or impact gun and then some means to keep the flywheel still as the nut is spun off. The flywheel can then be pulled off with a puller or pried off from behind. See the following topics:
https://www.rx7club.com/forum/showthread.php?t=559740
https://www.rx7club.com/forum/showthread.php?t=552288
https://www.rx7club.com/forum/showthread.php?t=485098
https://www.rx7club.com/forum/showthread.php?t=483905
https://www.rx7club.com/forum/showthread.php?t=399637
https://www.rx7club.com/forum/showthread.php?t=408309
https://www.rx7club.com/forum/showthread.php?t=273219
https://www.rx7club.com/forum/showthread.php?t=244162
https://www.rx7club.com/forum/showthread.php?t=176418
https://www.rx7club.com/forum/showthread.php?t=169323
https://www.rx7club.com/forum/showthread.php?t=83807
Thread
Thread Starter
Forum
Replies
Last Post