help me please
08-14-03, 12:12 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: st. louis
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
help me please
i have a huge problem... my car wont run for crap and when it does run, it dies all the time.... after about 15 minutes of driving then it begins to get better... also when driving i push the throttle pedal past 1/4 way down and the car just sputters, loses power, and runs really bad. i was thinking it could be a bad vacuume line somewhere, bad tps sensor, or maybe even a dirty fuel filter. any feedback would be greatly appreciated. thank you
08-14-03, 03:05 PM
#4
Junior Member
Thread Starter
Join Date: Jun 2003
Location: st. louis
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
well. get this..... i can be driving along, get on it a little bit and nothing will happen,(no check engine) and other times i can do the same thing, get on it and at about 4k the check engine light comes on. what the hell?? if i turn the car off then back on the check engine light goes off. i got the throttle cable tightened up. that was my idle problem. but now the damn thing just falls on it's face when the check engine light comes on... could it be a mass air flow sensor or something like that? ****. this is messing me up. hardcore..
08-14-03, 03:20 PM
#6
Senior Member
Join Date: Aug 2002
Location: Morgan County, Indiana
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
sounds like bad vacc lines, or an ecu problem, mine jreked realy bad right b4 i shifted, and i got a new ecu and that fixed it, but we need details about the cars, year model turbo or not, automatic or manual, how long has it sat, when did this start?
08-14-03, 04:19 PM
#7
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Got a check light - pull the code for openers.
If it's something like the MOP, you need to fix it now.
The procedure is in the FSM.
I have a copy - The link is in my sig below.
It's in the Fuel & emissions controls section.
If it's something like the MOP, you need to fix it now.
The procedure is in the FSM.
I have a copy - The link is in my sig below.
It's in the Fuel & emissions controls section.
