2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Heater wont blow hot air...

Thread Tools
 
Search this Thread
 
Old Mar 29, 2008 | 01:12 PM
  #1  
kuuva86's Avatar
Thread Starter
Rotary lover
Tenured Member 05 Years
 
Joined: Jan 2008
Posts: 56
Likes: 0
From: Oulu
Heater wont blow hot air...

Temperature control actuator isn`t working. So is the problem with control unit, or is it the control actuator it self ?
Reply
Old Mar 29, 2008 | 01:52 PM
  #2  
introVert's Avatar
putting it down daily
Tenured Member 15 Years
 
Joined: May 2003
Posts: 1,294
Likes: 0
From: Auburn, CA
More than likely it is a bad logicon (control unit). Icemark used to sell refurbs, but I don't know if he still does or not
Reply
Old Mar 29, 2008 | 04:02 PM
  #3  
KompressorLOgic's Avatar
I
Tenured Member: 20 Years
iTrader: (6)
 
Joined: May 2004
Posts: 3,755
Likes: 12
From: Spanaway, WA
ive also seen wehre the rob that adjusts the air mix, falls off. if u get up under the dash from the driver side u should see some rods on the side of the heater box... u could try manually moving them by hand and seeing if the air changes temp... one controls the front bents and other rod controls the tempuature.
Reply
Old Mar 30, 2008 | 08:49 AM
  #4  
kuuva86's Avatar
Thread Starter
Rotary lover
Tenured Member 05 Years
 
Joined: Jan 2008
Posts: 56
Likes: 0
From: Oulu
Yeah.. I can manually adjust the heating, by going under the dash from the driver side. But it´s a pain in the ***. So what to do ?
Reply
Old Mar 30, 2008 | 08:56 AM
  #5  
Banzai-Racing's Avatar
Rotary Specialists
Tenured Member: 15 Years
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2008
Posts: 4,868
Likes: 344
From: Indiana
Replace the logicon
Reply
Old Mar 30, 2008 | 09:47 AM
  #6  
DAVIDP's Avatar
Junior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Nov 2007
Posts: 35
Likes: 2
From: OREGON, OHIO
Rotary Performance has new logicon units for sale on clearance for $199. I priced one from the dealer and I think they wanted around $450!
Reply
Old Mar 30, 2008 | 01:14 PM
  #7  
kuuva86's Avatar
Thread Starter
Rotary lover
Tenured Member 05 Years
 
Joined: Jan 2008
Posts: 56
Likes: 0
From: Oulu
Damn. The part is so expensive. No wonder the previous owner didnt chage the logicon.
Reply
Old Mar 30, 2008 | 01:21 PM
  #8  
KompressorLOgic's Avatar
I
Tenured Member: 20 Years
iTrader: (6)
 
Joined: May 2004
Posts: 3,755
Likes: 12
From: Spanaway, WA
Originally Posted by kuuva86
Damn. The part is so expensive. No wonder the previous owner didnt chage the logicon.
A better bet is buying a used one for dirt cheap, u can prolly get one for 20 bucks.
Reply
Old Mar 30, 2008 | 04:02 PM
  #9  
kuuva86's Avatar
Thread Starter
Rotary lover
Tenured Member 05 Years
 
Joined: Jan 2008
Posts: 56
Likes: 0
From: Oulu
Any ideas where I could order it ?
Reply
Old Mar 30, 2008 | 07:54 PM
  #10  
Mike0071's Avatar
Full Member
Tenured Member: 15 Years
 
Joined: Dec 2007
Posts: 111
Likes: 0
From: Fort Lauderdale
Try eBay, they always have stuff cheap...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
James Knox
New Member RX-7 Technical
9
Oct 5, 2015 07:56 AM
93FD510
New Member RX-7 Technical
2
Oct 1, 2015 02:00 PM




All times are GMT -5. The time now is 11:44 PM.