when i put the negative on the battery the hazards come on and its not the button.

a couple of things that are not wired:

afm to ecu (installing safc)
steering column
small white wire to alt

any ideas?

 

does your car have an alarm?

 

to be honest with you im not sure, where would the computer be located?

 

harness plug is behind glove box

 

thanks, i also found the location in the FSM. no security system is installed.
i tried switching out the front left flasher c.p.u., same thing.

I meant to mention before that the door lights are also constantly on. not sure about headlights because they are not installed right now.

i did just wire in 3 prosport gauges would any of these be causing the issue.

12v power - was wired into the fusebox using an "add a circuit fuse holder".
12v accessory - was wired into the radio accessory line.
illumination - light bulb wire near the cigarette lighter
ground - glovebox switch ground wire. (could have chosen a better location)

 

*Update* hazard light is flashing but only the rear turn signal is flashing at a rapid rate

 

ironically i now have this issue... walked by the window this morning and looked out to see my hazards going crazy. pulled flasher box out and apart, nothing looks burnt/broken. kind of annoyed

 

Somehow posted on the wrong thread, ignore this post