2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Hand cranking motor

Thread Tools
 
Search this Thread
 
Old 02-21-24, 05:02 PM
  #1  
Junior Member
Thread Starter
 
Leahstrom's Avatar
 
Join Date: Jun 2021
Location: Minnesota
Posts: 6
Received 1 Like on 1 Post
Hand cranking motor

I found paperwork in the car from a while back. Claims a compression test was done and the back rotor had no compression. From that I’m planning on taking the motor out and rebuilding it.

I poured 2 stroke oil down the leading trail plugs and hand cranked it. I attached two videos of me cranking it over. Does it sound as if the other rotor is working fine? Not sure what exactly I’m supposed to be listening for..
Thanks.
Attached Files

Last edited by Leahstrom; 02-21-24 at 05:55 PM.
Old 02-21-24, 07:24 PM
  #2  
Rotary Enthusiast

iTrader: (23)
 
DR_Knight's Avatar
 
Join Date: Nov 2007
Location: san diego
Posts: 1,347
Received 146 Likes on 125 Posts
If you took the leading or trailing plugs out then cranked it you should hear and feel compressed air pulsing out of each front then rear, then front, etc and be evenly spaced to ensure all 6 chambers have some sort of compression.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cactuscactus
2nd Generation Specific (1986-1992)
5
01-26-22 06:20 AM
DREYKO
2nd Generation Specific (1986-1992)
8
05-22-08 03:47 PM
Ryu
2nd Generation Specific (1986-1992)
6
09-13-04 09:38 PM
barcode
3rd Generation Specific (1993-2002)
3
10-08-03 10:10 AM
Ouijan
3rd Generation Specific (1993-2002)
3
04-17-02 11:53 AM



Quick Reply: Hand cranking motor



All times are GMT -5. The time now is 09:27 PM.